1. With the ignition off, press and hold down the rear fog lamp button (located to the left of the steering wheel).
2. While holding down the rear fog lamp button turn the igntion on (do not start the engine).
3. Immediately release the rear fog lamp button.
4. Press and hold the trip computer cycle button (on the end of the left turn indicator).
5. Press and hold the rear fog lamp button and continue to hold both buttons.
*If steps 2-5 are completed successfully:
6. RESETTING SERVICE MODE and then SERVICE MODE RESET will display after 10 seconds of holding both buttons.
7. Release the trip computer cycle and rear fog lamp button.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. With the ignition off, press and hold down the rear fog lamp button (located to the left of the steering wheel).
2. While holding down the rear fog lamp button turn the igntion on (do not start the engine).
3. Immediately release the rear fog lamp button.
4. Press and hold the trip computer cycle button (on the end of the left turn indicator).
5. Press and hold the rear fog lamp button and continue to hold both buttons.
*If steps 2-5 are completed successfully:
6. RESETTING SERVICE MODE and then SERVICE MODE RESET will display after 10 seconds of holding both buttons.
7. Release the trip computer cycle and rear fog lamp button.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. With the ignition off, press and hold down the rear fog lamp button (located to the left of the steering wheel).
2. While holding down the rear fog lamp button turn the igntion on (do not start the engine).
3. Immediately release the rear fog lamp button.
4. Press and hold the trip computer cycle button (on the end of the left turn indicator).
5. Press and hold the rear fog lamp button and continue to hold both buttons.
*If steps 2-5 are completed successfully:
6. RESETTING SERVICE MODE and then SERVICE MODE RESET will display after 10 seconds of holding both buttons.
7. Release the trip computer cycle and rear fog lamp button.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. With the ignition off, press and hold down the rear fog lamp button (located to the left of the steering wheel).
2. While holding down the rear fog lamp button turn the igntion on (do not start the engine).
3. Immediately release the rear fog lamp button.
4. Press and hold the trip computer cycle button (on the end of the left turn indicator).
5. Press and hold the rear fog lamp button and continue to hold both buttons.
*If steps 2-5 are completed successfully:
6. RESETTING SERVICE MODE and then SERVICE MODE RESET will display after 10 seconds of holding both buttons.
7. Release the trip computer cycle and rear fog lamp button.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. With the ignition off, press and hold down the trip computer CLEAR/RESET button.
*To succesfully reset, steps 2-5 must be completed within 3 seconds.
2. While holding down the CLEAR/RESET button turn the igntion on (do not start the engine).
3. Release the CLEAR/RESET button.
4. Press and hold down the trip computer TRIP button (located to the left of the steering wheel).
5. Continue to hold down the TRIP button and press and hold down the CLEAR/RESET button.
*If steps 2-5 are completed successfully:
6. RESETTING SERVICE MODE and SERVICE MODE RESET will appear after 10 seconds of holding both buttons.
7. Release the TRIP and CLEAR/RESET buttons.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. With the ignition off, press and hold down the trip computer CLEAR/RESET button.
*To succesfully reset, steps 2-5 must be completed within 3 seconds.
2. While holding down the CLEAR/RESET button turn the igntion on (do not start the engine).
3. Release the CLEAR/RESET button.
4. Press and hold down the trip computer TRIP button (located to the left of the steering wheel).
5. Continue to hold down the TRIP button and press and hold down the CLEAR/RESET button.
*If steps 2-5 are completed successfully:
6. RESETTING SERVICE MODE and SERVICE MODE RESET will appear after 10 seconds of holding both buttons.
7. Release the TRIP and CLEAR/RESET buttons.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. With the ignition off, press and hold down the trip computer CLEAR/RESET button.
*To succesfully reset, steps 2-5 must be completed within 3 seconds.
2. While holding down the CLEAR/RESET button turn the igntion on (do not start the engine).
3. Release the CLEAR/RESET button.
4. Press and hold down the trip computer TRIP button (located to the left of the steering wheel).
5. Continue to hold down the TRIP button and press and hold down the CLEAR/RESET button.
*If steps 2-5 are completed successfully:
6. RESETTING SERVICE MODE and SERVICE MODE RESET will appear after 10 seconds of holding both buttons.
7. Release the TRIP and CLEAR/RESET buttons.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. With the ignition off, press and hold down the trip computer CLEAR/RESET button.
*To succesfully reset, steps 2-5 must be completed within 3 seconds.
2. While holding down the CLEAR/RESET button turn the igntion on (do not start the engine).
3. Release the CLEAR/RESET button.
4. Press and hold down the trip computer TRIP button (located to the left of the steering wheel).
5. Continue to hold down the TRIP button and press and hold down the CLEAR/RESET button.
*If steps 2-5 are completed successfully:
6. RESETTING SERVICE MODE and SERVICE MODE RESET will appear after 10 seconds of holding both buttons.
7. Release the TRIP and CLEAR/RESET buttons.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. With the ignition off, press and hold down the trip computer CLEAR/RESET button.
*To succesfully reset, steps 2-5 must be completed within 3 seconds.
2. While holding down the CLEAR/RESET button turn the igntion on (do not start the engine).
3. Release the CLEAR/RESET button.
4. Press and hold down the trip computer TRIP button (located to the left of the steering wheel).
5. Continue to hold down the TRIP button and press and hold down the CLEAR/RESET button.
*If steps 2-5 are completed successfully:
6. RESETTING SERVICE MODE and SERVICE MODE RESET will appear after 10 seconds of holding both buttons.
7. Release the TRIP and CLEAR/RESET buttons.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. With the ignition off, press and hold down the trip computer CLEAR/RESET button.
*To succesfully reset, steps 2-5 must be completed within 3 seconds.
2. While holding down the CLEAR/RESET button turn the igntion on (do not start the engine).
3. Release the CLEAR/RESET button.
4. Press and hold down the trip computer TRIP button (located to the left of the steering wheel).
5. Continue to hold down the TRIP button and press and hold down the CLEAR/RESET button.
*If steps 2-5 are completed successfully:
6. Continue to hold the TRIP and CLEAR/RESET buttons, RESETTING SERVICE MODE, will appear.
7. After 10 seconds SERVICE MODE RESET will appear.
8. Release the TRIP and CLEAR/RESET buttons.
9. Turn the ignition off and then start the engine to verify the indicator has been reset.