1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the OIL LIFE REMAINING value is not 100%, the system needs to be reset again.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the “Change Engine Oil Soon” message is not on, the system is reset. If it is on, turn the ignition off and repeat steps 1-2.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
2. *Use the DIC controls on the right side of the steering wheel to display the REMAINING OIL LIFE.
3. Press SEL on the DIC controls.
4. Hold SEL down for a few seconds to reset the oil life to 100%.
5. Turn the ignition off and start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.
1. Turn the ignition to run (one position before starting engine).
2. *Use the DIC controls on the right side of the steering wheel to display the REMAINING OIL LIFE.
3. Press SEL on the DIC controls.
4. Hold SEL down for a few seconds to reset the oil life to 100%.
5. Turn the ignition off and start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.
1. Turn the ignition to run (one position before starting engine).
2. *Use the DIC MENU button on the right side of the steering wheel to display OIL LIFE REMAINING on the DIC.
3. Press the Set/Reset button and hold for two seconds to clear the CHANGE ENGINE OIL SOON message and reset the oil life to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.
1. Turn the ignition to run (one position before starting engine).
2. *Use the DIC controls on the right side of the steering wheel to display the REMAINING OIL LIFE.
3. Press SEL on the DIC controls.
4. Hold SEL down for a few seconds to reset the oil life to 100%.
5. Turn the ignition off and start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.
1. Turn the ignition to run (one position before starting engine).
2. Press the MENU button on the turn signal lever to show the Remaining Oil Life on the display.
3. To reset the engine oil life system, press the SET/CLR button on the turn signal lever while the oil life display is visible. After a few seconds, there will be a single chime and the oil life will be reset to 100%
4. Turn the ignition off and start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
2. Press the MENU button on the turn signal lever to show the Remaining Oil Life on the display.
3. To reset the engine oil life system, press the SET/CLR button on the turn signal lever while the oil life display is visible. After a few seconds, there will be a single chime and the oil life will be reset to 100%
4. Turn the ignition off and start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
3. Press the SET/CLR button to reset the oil life to 100%.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
2. Use the UP/DOWN arrow buttons on the right side of the steering wheel to display the OIL LIFE display.
3. Press and hold the SET/RESET (check mark) button until 100% is displayed.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
