To reset the 2017 Acura TLX maintenance light after an oil change service, please follow these instructions: Set the power mode to ON (do not start the engine). Press the right selector wheel until the content is displayed. Roll the right selector wheel until the Maintenance screen is displayed. Press and hold the right selector […]
non Multi-Information Display: 1. Turn the ignition to run (one position before starting engine). 2. Press the SELECT/RESET knob repeatedly until the engine oil life is displayed. 3. Press the SELECT/RESET knob for about 10 seconds. The information display shows the reset mode initial display. 4. Select the ‘‘OIL LIFE’’ indicator by turning the SELECT/RESET
2014 HONDA CR-V Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press the SELECT/RESET knob until the engine oil life indicator is displayed. 3. Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink. 4. Press the SELECT/RESET knob for more than 5 seconds.
2014 HONDA Crosstour Maintenance Light Reset Instructions Read More »
non Multi-Information Display: 1. Turn the ignition to run (one position before starting engine). 2. Press the SELECT/RESET knob until the engine oil life indicator is displayed. 3. Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink. 4. Press the SELECT/RESET knob for more
2014 HONDA Civic Maintenance Light Reset Instructions Read More »
Multi-Information Display: 1. Turn the ignition to run (one position before starting engine). 2. Press the (up/down) button to select Vehicle Settings, then press the SEL/RESET button. 3. Press the (up/down) button until Maintenance Reset appears on the display. 4. Press the SEL/RESET button – the oil life reset mode is displayed on the multi-information
2014 HONDA Accord Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press the brake and gas pedals at the same time; after 3 seconds the “Service: Oil reset in prog.” message will appear and after 25 seconds the “Service: Oil reset complete” message will appear. 3. Release the brake and gas pedals. 4. Turn
2014 FORD Transit Connect Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. From the Menu screen select Settings followed by Vehicle. 3. Select Oil Life Reset XXX% followed by Reset. 4. Turn the ignition off and then start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine). 2. Press and release the SELECT/RESET stem to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold the SELECT/RESET stem for two seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the
2014 FORD F-Series Pickup Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Use the Up and Down arrows to scroll the Menu and select Settings followed by Convenience. 3. Select Oil Life Reset XXX% followed by OK to reset. 4. Turn the ignition off and then start the engine to verify the indicator has been
2014 Explorer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the
2014 Expedition Maintenance Light Reset Instructions Read More »
News and information from the automotive industry
