1. Turn the engine on by holding the START/STOP switch. Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off.
2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the multi information display indicates that the reset is complete.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the engine on. Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off.
2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the multi information display indicates that the reset is complete - Resetting Oil Maintenance Data.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Start the engine. Switch the display to the odometer reading. Turn the engine off.
2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the multi information displays “COMPLETE”.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. With the engine running, switch the multi-information display to the SETTINGS screen using the controls on the right hand side of the steering wheel.
2. Select MAINTENANCE SYSTEM on the SETTINGS screen.
3. Select YES on the MAINTENANCE SYSTEM screen.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run - engine off (push START/STOP button once).
2. Press the Menu switch to change the multi-information display to blank. Turn the engine off.
3. While pressing the ODO/TRIP button, set the “ENGINE START STOP" switch to run - engine off (push START/STOP button once).
4. Keep pushing the “ODO/TRIP” switch for more than 7 seconds. While doing this operation, the master warning light comes on, a warning tone sounds and the "RESETTING OIL MAINTENANCE DATA" message appears to inform you that light has been reset. After 5 seconds, the system reset is completed.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. With the engine running, switch the display to TRIP METRE A; then turn ignition off.
2. While pressing the ODO TRIP button turn the ignition switch to on (do not start engine).
3. "Resetting Oil Maintenance Data" will display and continue to hold button until trip meter displays "000000".
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. With the engine running, switch the display to TRIP METRE A; then turn ignition off.
2. While pressing the ODO TRIP button turn the ignition switch to on (do not start engine).
3. "Resetting Oil Maintenance Data" will display and continue to hold button until trip meter displays "000000".
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Start the engine/hybrid system.
2. Switch the display to the trip meter “A” when the hybrid system is operating. Turn the engine/hybrid system off.
3. While pressing the trip meter reset button, turn the “POWER” switch to ON mode. (do not start the hybrid system because otherwise the reset mode will be cancelled). Continue to press and hold the button until the trip meter displays “000000” and the multi-information display indicates that the reset is complete.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Land Rover recommends the use of a reset tool.

Land Rover recommends the use of a reset tool.