The 2014 MAZDA3 for North America is offered in a gasoline model. After performing the oil change the maintenance data will need to be reset. There are 2 different reset methods depending on if the vehicle has a touch screen:
Press and hold the TRIP button with the ignition switched off.
Continue to hold the TRIP button and switch the ignition on.
After 5 seconds the master warning light will flash for a few seconds to indicate the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Touch Screen Instructions:
Turn the ignition to run (one position before starting the engine).
Select the Applications (A) icon.
Select Maintenance to display the maintenance list screen and select Oil Change.
Select Reset and follow the prompts.
Turn the ignition off and then start the engine to verify the indicator has been reset.
When doing the oil change and topping up fluids you will need to use the following specifications:
Engine Size | 4 Cyl. 2.0L Gas | 4 Cyl. 2.5L Gas |
Motor Oil | OW-20 | OW-20 |
Oil Capacity w/Filter | 4.4 US qt. (4.2L) | 4.8 US qt. (4.5L) |
Clutch Fluid | SAE J1703 or FMVSS116 DOT-3 | SAE J1703 or FMVSS116 DOT-3 |
Brake Fluid | SAE J1703 or FMVSS116 DOT-3 | SAE J1703 or FMVSS116 DOT-3 |
Engine Coolant | Mazda Genuine FL22 | Mazda Genuine FL22 |
Automatic Transmission | Mazda Genuine ATF FZ | Mazda Genuine ATF FZ |
Manual Transmission | GL-4/ 75W-80 | GL-4/ 75W-80 |
You can cross reference the following Purolator filter numbers for your own application:
Engine Size | 4 Cyl. 2.0L Gas | 4 Cyl. 2.5L Gas |
Oil Filter | L14612 | L14612 |
Air Filter | A26280 | A26280 |
Cabin Filter | *Dealer Part | *Dealer Part |