To reset the 2010 Range Rover LR2 service interval, please follow these instructions:

1.With the engine off, press and hold the trip reset button.

2. While holding the trip reset button, press the START/STOP button to turn the ignition on (do not press the brake pedal).

3. Release the trip reset button within 10 seconds of turning the ignition to run.  If the manual reset mode has been successfully entered ‘dISt’ or ‘DATE’ will be displayed in the odometer, depending on which trigger has been activated.

4. To clear the ‘dISt’ trigger press, and hold the trip reset button for more than 5 seconds within 10 seconds of entering the manual re-set mode. If successful, ‘RESET’ will be displayed in the odometer for 5 seconds. If the date trigger has not been activated ‘END’ will then be displayed in the odometer.

5. If the date trigger has been activated, ‘DATE’ will be displayed in the odometer. To clear the trigger press and hold the trip reset button for more than 5 seconds within 10 seconds of ‘DATE’ being displayed. If successful, ‘RESET’ will be displayed within the odometer for 5 seconds followed by ‘END’ The odometer will now exit re-set mode.

6. Turn the ignition off and then start the engine to verify the indicator has been reset.