1. Turn the ignition to run (one position before starting engine). 2. Press and hold the SELECT/RESET button for 2 seconds. Repeathdly press the SELECT/RESET button to display OIL LIFE RESET and START VALUE. 3. Press and hold the SELECT/RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE […]
2010 Explorer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press and hold the SELECT/RESET button for 2 seconds. Repeathdly press the SELECT/RESET button to display OIL LIFE RESET and START VALUE. 3. Press and hold the SELECT/RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE
2009 Explorer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press and hold the SELECT/RESET button for 2 seconds. Repeathdly press the SELECT/RESET button to display OIL LIFE RESET and START VALUE. 3. Press and hold the SELECT/RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE
2008 Explorer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Enter SYSTEM CHECK to display “OIL XXX% OIL LIFE OK”. 3. Press RESET button to display “HOLD RESET IF NEW OIL”. 4. Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET
2007 Explorer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Enter SYSTEM CHECK to display “OIL XXX% OIL LIFE OK”. 3. Press RESET button to display “HOLD RESET IF NEW OIL”. 4. Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET
2006 Explorer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”. 3. Press RESET control to reset oil change. 4. Turn the ignition off and then start the engine to verify the indicator has been reset.
2005 Explorer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”. 3. Press RESET control to reset oil change. 4. Turn the ignition off and then start the engine to verify the indicator has been reset.
2004 Explorer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press the SETUP control to access the System Check function. 3. Press and release the RESET control to display “OIL LIFE XX% HOLD RESET NEW”. 4. Press and hold the RESET control for 2 seconds to display “IF NEW OIL HOLD RESET”. 5.
2003 Explorer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press the SETUP control to access the System Check function. 3. Press and release the RESET control to display “OIL LIFE XX% HOLD RESET NEW”. 4. Press and hold the RESET control for 2 seconds to display “IF NEW OIL HOLD RESET”. 5.
2002 Explorer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display “OIL LIFE RESET TO 100%”. 3. Turn the ignition off and then start the engine to verify
2001 Explorer Maintenance Light Reset Instructions Read More »
