1. Turn the ignition to run (one position before starting engine). 2. Display OIL LIFE RESET on the DIC (use i button). 3. Press and hold the ENTER (arrow) button for at least 1 second. An ACKNOWLEDGED display message will appear for 3 seconds. 4. Turn the ignition off and then start the engine to […]
2007 CHEVROLET Mailbu Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Display OIL LIFE RESET on the DIC (use i button). 3. Press and hold the ENTER (arrow) button for at least 1 second. An ACKNOWLEDGED display message will appear for 3 seconds. 4. Turn the ignition off and then start the engine to
2006 CHEVROLET Mailbu Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Display OIL LIFE RESET on the DIC (use i button). 3. Press and hold the ENTER (arrow) button for at least 1 second. An ACKNOWLEDGED display message will appear for 3 seconds. 4. Turn the ignition off and then start the engine to
2005 CHEVROLET Mailbu Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If CHANGE ENGINE OIL light does not go out, turn off the ignition and repeat steps 1-3. 4. Turn the ignition off and then start the engine
2000 CHEVROLET Lumina Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If CHANGE ENGINE OIL light does not go out, turn off the ignition and repeat steps 1-3. 4. Turn the ignition off and then start the engine
1999 CHEVROLET Lumina Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If CHANGE ENGINE OIL light does not go out, turn off the ignition and repeat steps 1-3. 4. Turn the ignition off and then start the engine
1998 CHEVROLET Lumina Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If CHANGE ENGINE OIL light does not go out, turn off the ignition and repeat steps 1-3. 4. Turn the ignition off and then start the engine
1997 CHEVROLET Lumina Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Display the OIL LIFE REMAINING on the DIC by pressing the button (car i) 3. Press and hold the SET/RESET (check mark) button on the DIC for more than 5 seconds. The oil life will change to 100%. 4. Turn the ignition off
2013 CHEVROLET Impala Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Display the OIL LIFE REMAINING on the DIC by pressing the button (car i) 3. Press and hold the SET/RESET (check mark) button on the DIC for more than 5 seconds. The oil life will change to 100%. 4. Turn the ignition off
2012 CHEVROLET Impala Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Display the OIL LIFE REMAINING on the DIC by pressing the button (car i) 3. Press and hold the SET/RESET (check mark) button on the DIC for more than 5 seconds. The oil life will change to 100%. 4. Turn the ignition off
2011 CHEVROLET Impala Maintenance Light Reset Instructions Read More »
