1. Turn the ignition to run (one position before starting engine). 2. Press the SETUP control to access the System Check function. 3. Press and release the RESET control to display “OIL LIFE XX% HOLD RESET NEW”. 4. Press and hold the RESET control for 2 seconds to display “IF NEW OIL HOLD RESET”. 5. […]
2002 Explorer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display “OIL LIFE RESET TO 100%”. 3. Turn the ignition off and then start the engine to verify
2001 Explorer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display “OIL LIFE RESET TO 100%”. 3. Turn the ignition off and then start the engine to verify
2000 Explorer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display “OIL LIFE RESET TO 100%”. 3. Turn the ignition off and then start the engine to verify
1999 Explorer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the
2013 Expedition Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the
2012 Expedition Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the
2011 Expedition Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the
2010 Expedition Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press both the accelerator and brake pedals at the same time. 3. Keep both pedals fully pressed. After 3 seconds the “Service:Oil reset in prog.” message will be displayed. 4. After 25 seconds, the “Service: Oil reset complete” message will be displayed. 5.
2013 Escape Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Select the OIL CHANGE XXX% from INFO menu then press the SET control to access the system check function. 3. Press and release the SET control to display “OIL CHNG XXX% HOLD SET NEW”. 4. Press and hold the SET control for 2
2007 Escape Maintenance Light Reset Instructions Read More »
