With Driver Information Centre (DIC): 1. Turn the ignition to run (one position before starting engine). 2. Press the vehicle information button (i) until OIL LIFE REMAINING displays. 3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go […]
2010 Traverse Maintenance Light Reset Instructions Read More »
With Driver Information Centre (DIC): 1. Turn the ignition to run (one position before starting engine). 2. Press the vehicle information button (i) until OIL LIFE REMAINING displays. 3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go
2009 Traverse Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been
2009 CHEVROLET Trailblazer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been
2008 CHEVROLET Trailblazer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been
2007 CHEVROLET Trailblazer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been
2006 CHEVROLET Trailblazer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been
2005 CHEVROLET Trailblazer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been
2004 CHEVROLET Trailblazer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. *Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem. 3. Press and hold the SET/RESET (check
2013 CHEVROLET Tahoe Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. *Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem. 3. Press and hold the SET/RESET (check
2012 CHEVROLET Tahoe Maintenance Light Reset Instructions Read More »
