OilReset.com Blog

1. Turn the ignition to run (one position before starting engine). 2. Press the brake and gas pedals at the same time; after 3 seconds the “Service: Oil reset in prog.” message will appear and after 25 seconds the “Service: Oil reset complete” message will appear. 3. Release the brake and gas pedals. 4. Turn […]

1. Turn the ignition to run (one position before starting engine/ one push of START/STOP button). 2. Using the arrow keypad (left of steering wheel) select SETTINGS. 3. From the SETTINGS menu select VEHICLE. 4. From the VEHICLE menu select OIL LIFE RESET followed by OK. 5. Turn the ignition off and then start the

1. Turn the ignition to run (one position before starting engine/ one push of START/STOP button). 2. Using the arrow keypad (left of steering wheel) select SETTINGS. 3. From the SETTINGS menu select VEHICLE. 4. From the VEHICLE menu select OIL LIFE RESET followed by OK. 5. Turn the ignition off and then start the

1. Turn the ignition to run (one position before starting engine/ one push of START/STOP button). 2. Using the arrow keypad (left of steering wheel) select SETTINGS. 3. From the SETTINGS menu select VEHICLE. 4. From the VEHICLE menu select OIL LIFE RESET followed by RESET. 5. Turn the ignition off and then start the

1. Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off. 2. While pressing the “ODO/TRIP” button, set the engine switch to run (push START/STOP button once). 3. Continue holding the “ODO/TRIP button for about 5 seconds. The resetting

1. Turn the engine on by holding the START/STOP switch. Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off. 2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until

1. Turn the engine on. Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off. 2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the multi information display indicates

1. Start the engine. Switch the display to the odometer reading. Turn the engine off. 2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the multi information displays “COMPLETE”. 3. Turn the ignition off and then

1. With the engine running, switch the multi-information display to the SETTINGS screen using the controls on the right hand side of the steering wheel. 2. Select MAINTENANCE SYSTEM on the SETTINGS screen. 3. Select YES on the MAINTENANCE SYSTEM screen. 4. Turn the ignition off and then start the engine to verify the indicator

1. Turn the ignition to run – engine off (push START/STOP button once). 2. Press the Menu switch to change the multi-information display to blank. Turn the engine off. 3. While pressing the ODO/TRIP button, set the “ENGINE START STOP” switch to run – engine off (push START/STOP button once). 4. Keep pushing the “ODO/TRIP”