OilReset.com Blog

1. Start the engine. 2. If a service is due the display will show “Service required”. To reset this message, locate and press the OK button located at the top right of the steering wheel for more than 1 second. 3. The service interval will be reset to the default setting. *The service interval feature […]

1. Start the engine. 2. If a service is due the display will show “Service required”. To reset this message, locate and press the DOWN button located at the bottom right of the steering wheel for more than 1 second. 3. The service interval will be reset to the default setting. *The service interval feature

1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. With the ignition off, press and hold down the rear fog lamp button (located to the left of the steering wheel). 2. While holding down the rear fog lamp button turn the igntion on (do not start the engine). 3. Immediately release the rear fog lamp button. 4. Press and hold the trip computer

Jaguar recommends the use of a reset tool.

1. With the ignition off, press and hold down the rear fog lamp button (located to the left of the steering wheel). 2. While holding down the rear fog lamp button turn the igntion on (do not start the engine). 3. Immediately release the rear fog lamp button. 4. Press and hold the trip computer

Turn the ignition on without starting the engine (press START/STOP) button. Monitor: 1. Push the INFO button and select MAINTENANCE. 2. Select ENGINE OIL and then select RESET. 3. Press the BACK button. 4. Select OIL FILTER and then select RESET. 5. Press the BACK button until you return to the main menu. 6. Turn