OilReset.com Blog

Multi-Information Display: 1. Turn the ignition to run (one position before starting engine). 2. Press the (up/down) button to select Vehicle Settings, then press the SEL/RESET button. 3. Press the (up/down) button until Maintenance Reset appears on the display. 4. Press the SEL/RESET button – the oil life reset mode is displayed on the multi-information […]

1. Turn the ignition to run (one position before starting engine). 2. Press the brake and gas pedals at the same time; after 3 seconds the “Service: Oil reset in prog.” message will appear and after 25 seconds the “Service: Oil reset complete” message will appear. 3. Release the brake and gas pedals. 4. Turn

1. Turn the ignition to run (one position before starting engine). 2. From the Menu screen select Settings followed by Vehicle. 3. Select Oil Life Reset XXX% followed by Reset. 4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine). 2. Press and release the SELECT/RESET stem to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold the SELECT/RESET stem for two seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the

1. Turn the ignition to run (one position before starting engine). 2. Use the Up and Down arrows to scroll the Menu and select Settings followed by Convenience. 3. Select Oil Life Reset XXX% followed by OK to reset. 4. Turn the ignition off and then start the engine to verify the indicator has been

1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the

1. Turn the ignition to run (one position before starting engine). 2. Press both the accelerator and brake pedals at the same time. 3. Keep both pedals fully pressed. After 3 seconds the “Service:Oil reset in prog.” message will be displayed. 4. After 25 seconds, the “Service: Oil reset complete” message will be displayed. 5.

1. Turn the ignition to run (one position before starting engine). 2. Use the left steering wheel controls to scroll through the message center. Press the up/down arrow repeatedly until OIL LIFE RESET is selected. 3. Press OK to select this option and display SET XXX%. 4. Press and hold OK again for 2 seconds

1. Turn the ignition to run (one position before starting engine). 2. Press and release the SELECT/RESET stem to display “OIL LIFE = XXX% HOLD RESET = NEW”. 3. Press and hold the SELECT/RESET stem for 2 seconds and release to reset to 100%. 4. Turn the ignition off and then start the engine to

1. Turn the ignition to run (one position before starting engine). 2. Use the Up and Down arrows to scroll the Menu and select Settings followed by the Vehicle Menu. 3. Select Oil Life Reset XXX% followed by Reset. 4. Turn the ignition off and then start the engine to verify the indicator has been