1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.
2008 JEEP Commander Maintenance Light Reset Instructions Read More »
To reset the 2015 MAZDA 3 maintenance monitor, please follow these instructions: TRIP button reset: 1. Press and hold the TRIP button with the ignition switched off. 2. Continue to hold the TRIP button and switch the ignition on. 3. After 5 seconds the master warning light will flash for a few seconds to
2015 MAZDA3 Maintenance Monitor Reset Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press the DIC MENU button on the turn signal lever to enter the Vehicle Information Menu. 3. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE. 4. Press the SET/CLR button to reset the oil life at
2013 Chevrolet Orlando Maintenance Light Reset Instructions Read More »
The 2015 Ford Escape is equipped with an oil life % light that comes on when the vehicle is due or past due for an oil change service. To reset the 2015 Ford Escape oil life %, please follow these instructions: Turn the ignition to the on position (do not start the engine). Press both
2015 Ford Escape Oil Life Reset Read More »
Land Rover recommends the use of a reset tool.
2005 LAND ROVER Range Rover Sport Maintenance Light Reset Instructions Read More »
To reset the 2015 Honda CR-V engine oil life, please follow these instructions: Models with information display: 1. Turn the ignition switch to ON (do not start the engine). 2. Display the engine oil life by repeatedly pressing the (Select/Reset) knob. 3. Press and hold the knob for 10 seconds or more. The engine
2015 Honda CR-V Engine Oil Life Reset Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press and release the SELECT/RESET stem to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold the SELECT/RESET stem for two seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the
2009-2012 F-Series Maintenance Light Reset Instructions Read More »
To reset the 2015 RAM 1500, please follow these instructions: Driver Information Display (DID) 1. Without pushing the brake pedal, cycle the ignition to the ON/RUN position (do not start the engine). 2. Push and release the DOWN arrow button to scroll downward through the main menu to “ Vehicle Info.” 3.
To reset the 2015 Chevrolet Silverado, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. *Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the
2015 Chevrolet Silverado Oil Life Reset Read More »
1. Turn the ignition to (II) – do not start the engine. 2. Press the SEL/RESET button on the steering wheel until you see the engine oil life display. 3. Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown
2007 ACURA CSX Maintenance Light Reset Instructions Read More »
