OilReset.com Blog

Land Rover recommends the use of a reset tool.

1. Turn the ignition to run (one position before starting engine).“2. Press and release the SELECT/RESET stem to display ?OIL LIFE = XXX% HOLD RESET = NEW””.”“3. Press and hold the SELECT/RESET stem for 2 seconds and release. Oil life is set to XX% and “”OIL LIFE SET TO XX%”” is displayed.”4. Turn the ignition

1. Turn off the ignition. 2. Press and hold the TRIP ODOMETER button in the instrument cluster and turn the ignition to Accessory. 3. Keep the button pressed for 5 seconds until OIL SERVICE RESET (RE) or INSPECTION RESET (RE) appears in the display. Then release the button. 4. Press and hold the button again

1. Insert ignition key into slot below indicator flag at lower right corner of instrument cluster. 2. Push key in until indicator changes from red to green.

1. Turn the ignition to run (one position before starting engine). 2. Display OIL LIFE on the DIC by pressing the reset stem button. 3. Press and hold the reset stem. The oil life will change to 100% and a beep will sound. 4. Turn the ignition off and then start the engine to verify

1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the

1. Turn the ignition to run (one position before starting engine). 2. Press the brake and gas pedals at the same time for 20 seconds. 3. An oil lamp with wrench will display with the message ENGINE OIL CHANGE DUE NEXT SERVICE. 4. Turn the ignition off and then start the engine to verify the

1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).“2. Enter SYSTEM CHECK to display “”OIL XXX% OIL LIFE OK””.”“3. Press RESET button to display “”HOLD RESET IF NEW OIL””.”“4. Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “”OIL CHANGE SET TO 100%”” is

1. Turn the ignition to run (one position before starting engine). 2. Press the INFO and RESET (arrow) buttons on the DIC at the same time to enter the personalization menu. 3. Press the INFO button to scroll through the menu until OIL LIFE RESET is displayed. 4. Press and hold the RESET button until