To reset the 2010 Jeep Wrangler, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. Turn the ignition to off. 4. Turn the ignition off and start the engine to verify the indicator has been reset.
2004 BUICK Rainier Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.
2008 CHRYSLER 300 Maintenance Light Reset Instructions Read More »
To reset the 2010 Infiniti G37, please follow these instructions: Turn the ignition on without starting the engine (press START/STOP) button. Monitor: 1. Push the INFO button and select MAINTENANCE. 2. Select ENGINE OIL and then select RESET. 3. Press the BACK button. 4. Select OIL FILTER and then select RESET. 5. Press the BACK
*No manual reset available. A diagnostic tool is required.
1997 AUDI A8 Maintenance Light Reset Instructions Read More »
To reset the 2011 Lexus ES350, please follow these instructions: 1. Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off. 2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button
1. Turn the ignition to run (one position before starting engine).
2001-2007 C-K Series Trucks Maintenance Light Reset Instructions Read More »
With Driver Information Centre (DIC): 1. Turn the ignition to run (one position before starting engine). 2. Press the OPTION button on the DIC until ENGINE OIL MONITOR appears on the DIC screen. 3. Press the SET/RESET button to reset the system. The next screen indicates that the CHANGE OIL SOON message has been reset.
2005 BUICK Allure Maintenance Light Reset Instructions Read More »
To reset the 2007 Nissan Altima maintenance info, please follow these instructions: 1. Turn the ignition to run (one position before starting engine/push START/STOP button once). 2. Press the square button (□) , located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode. 3. In the
BMW recommends the use of a reset tool.
1996 BMW Z3 Maintenance Light Reset Instructions Read More »
