1. Turn the ignition to position 1 (one position before starting the engine). 2. Press the system selection button (3 located on the lower left of the steering wheel) repeatedly until the kilometer or temperature reading is shown in the multi information display.) 3. Press the TRIP reset button (center button on instrument panel) quickly […]

1. Turn the ignition to position 1 (one position before starting the engine). 2. Press button (UP arrow) or (DOWN arrow) on the multifunction steering wheel until the FSS indicator appears in the multifunction display. 3. Press the reset knob for about 3 seconds. The message appears in the tachometer “SERVICE INTERVAL? RESET WITH R

1. Turn the ignition to position 1 (one position before starting the engine). 2. Press button (UP arrow) or (DOWN arrow) on the multifunction steering wheel until the FSS indicator with (Single Wrench) or (Double Wrench) and the service deadline appears in the multifunction display. 3. Press the reset button R in the instrument cluster

1. Turn the ignition to position 1 (one position before starting the engine). 2. Within 4 seconds press 0 button twice. 3. The present status for days or distance displays, within 10 seconds turn the electroninc key in steering lock to position 0. 4. Press and hold 0 button while turning electronic key in steering

1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “”OIL LIFE XXX% HOLD RESET = NEW”” and press SELECT. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Again, press and hold the RESET control for 3 seconds.

1. Turn the ignition to run (push START/STOP button once). 2. Select STATUS from the vehicle menu screen. 3. Select OIL MAINTENANCE. 4. Press and hold right on the control pad for 5 seconds. “COMPLETE” will be displayed when reset is complete. 5. Turn the ignition off and then start the engine to verify the

1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the

1. Turn the ignition to position 1 (one position before starting the engine). 2. Press button (UP arrow) or (DOWN arrow) on the multifunction steering wheel until the FSS indicator with (Single Wrench) or (Double Wrench) and the service deadline appears in the multifunction display. 3. Press the reset knob to the left in the

1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1 (one position before starting the engine). 2. Press the system selection button (3 located on the lower left of the steering wheel) repeatedly until the kilometer reading is shown in the multi information display.) 3. Press the cluster illumination button (lower left of instrument panel) quickly 3 times.