Land Rover recommends the use of a reset tool.

1. Turn the ignition to run (one position before starting engine). 2. Press and release the SELECT/RESET stem to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold the SELECT/RESET stem for two seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the

1. Turn the ignition to (II) – do not start the engine. 2. Press the SEL/RESET button on the steering wheel until you see the engine oil life display. 3. Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown

1. Turn the ignition to run (one position before starting engine).2. Press the fuel information button (located on instrument panel cluster above steering column) until ENGINE OIL LIFE appears in the display. 3. Press and hold the select button (arrow button) for 5 seconds while ENGINE OIL LIFE is displayed. OIL LIFE RESET will appear

1. Turn the ignition to run (one position before starting engine).2. Press SETUP to display OIL LIFE %.“3. Press RESET button to display “”HOLD RESET IF NEW OIL””.”“4. Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “”OIL CHANGE SET TO 100%”” is displayed. “5. Turn

1. Turn the ignition to run (one position before starting engine). 2. Select the OIL CHANGE XXX% from INFO menu then press the SET control to access the system check function. 3. Press and release the SET control to display “OIL CHNG XXX% HOLD SET NEW”. 4. Press and hold the SET control for 2

1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).2. Press the SELECT/RESET knob until the engine oil life indicator is displayed.3. Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink.“4. Press the SELECT/RESET knob for more than 5 seconds. The maintenance items

2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting.4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine). 2. Press SELECT to change the oil life start value. OIL LIFE START VALUE SET TO XXX% will be displayed. 3. Press and hold the RESET control for two seconds and release. Oil life is set to 100% “OIL LIFE XXX% HOLD RESET IF