To reset the 2016 Subaru Crosstrek maintenance light after an oil change service, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Using the controsl on the left hand side of the steering wheel. Pull the i/Set button towards you to bring up the selection screen. 3. Use […]
To reset the 2016 Nissan GT-R maintenance settings after an oil change, please follow these instructions: 1. Push the ignition switch to the ON position (do not start the engine). Use the ENTER button (square) and toggle the vehicle information display to show the SETTING screen. Use the NEXT button (circle) to select. 2. Use
To reset the 2016 Toyota Camry maintenance data after an oil change, please follow these instructions: non Multi-Information Display: 1. Turn the ignition to run (one position before starting engine). 2. Ensure Trip metre A reading is shown. Turn ignition off. Vehicles with smart key system: 3.While pressing the trip meter reset button, press the
To reset the 2015 Infiniti Q50 maintenance data, please follow these instructions: 1.Turn the ignition on without starting the engine (press START/STOP) button. 2. Using the lower center console display press the MENU button. 3. From the MENU screen select SETTINGS. 4. From the SETTINGS screen select METER. 5. From the METER screen select Maintenance.
To reset the 2015 Lexus RX series maintenance light, please follow these instructions: 1. Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off. 2. While pressing the “ODO/TRIP” button, set the engine switch to run (push START/STOP button
To reset the 2015 Lexus IS 250 maintenance data, please follow these instructions: 1. With the engine running, switch the multi-information display to the SETTINGS screen using the controls on the right hand side of the steering wheel. 2. Select MAINTENANCE SYSTEM on the SETTINGS screen. 3. Select YES on the MAINTENANCE SYSTEM screen. 4.
To reset the 2015 Scion tC maintenance data, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Select trip metre A reading by using the trip metre button and then turn the ignition off. 3. While pressing the trip meter reset button, turn the ignition switch to run
To reset the 2015 Scion iQ maintenance data, please follow these instructions: 1. With the engine running switch the display to trip metre A. Turn the engine off. 2. While pressing the MODE button, turn the engine switch to the ON position (do not start the engine or the reset process will be cancelled). Continue
To reset the 2015 Lexus RC maintenance data, please follow these instructions: 1. Start the engine/hybrid system. (Use the steering wheel controls on the right hand side). 2. Press the (BOX) icon. 3. Scroll the menu using the left or right arrows. Select the (GEAR) icon and select by pressing the (CIRCLE) button in the
The 2013 Toyota Venza is offered in a gasoline model. After performing the oil change the maintenance data will need to be reset. Follow these steps to reset this light: 1. Start the engine and bring up the trip meter A reading. Vehicles with smart key system: 2. Turn the “ENGINE START STOP” switch off.
2013 Toyota Venza Maintenance Light Reset & Specs Read More »
