
To reset the 2016 Toyota Camry maintenance data after an oil change, please follow these instructions:
non Multi-Information Display:
1. Turn the ignition to run (one position before starting engine).
2. Ensure Trip metre A reading is shown. Turn ignition off.
Vehicles with smart key system:
3.While pressing the trip meter reset button, press the “ENGINE START STOP” switch to IGNITION ON mode. Continue to press and hold the button until the trip meter displays “000000”.
Vehicles without smart key system:
3.While pressing the trip meter reset button, turn the ignition on. Continue to press and hold the button until the trip meter displays “000000”.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
Multi-Information Display:
1. With the engine running, switch the multi-information display to the Settings screen.
2. Select Maintenance Reset on the Settings screen.
3. Select Yes on the Maintenance Reset screen. “Maintenance Reset Complete” will be displayed.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.