1. Turn the ignition to run – engine off (push START/STOP button once).
2. Press the Menu switch to change the multi-information display to blank. Turn the engine off.
3. While pressing the ODO/TRIP button, set the “ENGINE START STOP” switch to run – engine off (push START/STOP button once).
4. Keep pushing the “ODO/TRIP” switch for more than 7 seconds. While doing this operation, the master warning light comes on, a warning tone sounds and the “RESETTING OIL MAINTENANCE DATA” message appears to inform you that light has been reset. After 5 seconds, the system reset is completed.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.