The 2014 Toyota Avalon maintenance light can be reset one the oil change has been performed. To reset the 2014 Toyota Avalon maintenance light, follow these instructions:
1. Turn the ignition to run (one position before starting engine).
2. Ensure trip meter reading A is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).4. Continue to press and hold the knob until the trip meter displays “000000”.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Filter Specification
The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:
Filter Type | Part # (2.5L) | Part # (3.5L) |
Oil Filter | 9972 | 9972 |
Air Filter | 10677 | 10755 |
Cabin Filter | 10285 | 10285 |
Oil Specification
The oil specs for this vehicle have been taken directly from the owner’s manual. More details around oil, torque, tires, and specifications can be referenced in the owner’s manual.