The 2014 Toyota Camry maintenance light comes on when the vehicle is close to the oil change interval or past due.  To reset the 2014 Toyota Camry maintenance light, follow these instructions after completing the oil change service:

1. Turn the ignition to run (one position before starting engine).
2. Ensure Trip metre A reading is shown. Turn ignition off.
Vehicles with smart key system:
3.While pressing the trip meter reset button, press the “ENGINE START STOP” switch to IGNITION ON mode. Continue to press and hold the button until the trip meter displays “000000”.
Vehicles without smart key system:
3.While pressing the trip meter reset button, turn the ignition on. Continue to press and hold the button until the trip meter displays “000000”.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Filter Specification

The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:

Oil Specification

The oil specs for this vehicle have been taken directly from the owner’s manual. More details around oil, torque, tires, and specifications can be referenced in the owner’s manual.