2008 Pontiac G8

To reset the 2008 Pontiac G8 oil change reminder light please follow these instructions:

1. Turn the ignition to run (one position before starting engine).

2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.

3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Pontiac G8 Ignition

https://www.oilreset.com

2009 Toyota Yaris

To reset the 2009 Toyota Yaris maintenance required (MAINT REQD) light please follow these instructions:

1. Turn the ignition to ON (one position before starting engine).

2. Ensure odometer reading is shown.  Turn ignition off.

3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).

4. Hold down knob for at least 5 seconds.  The odometer indicates "000000" and the light goes off.  If the system fails to reset, the light will continue flashing.

5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2009 Toyota Yaris Instrument Clusters

2009 Toyota Yaris Ignition

https://www.oilreset.com

2011 VW Jetta

To reset the 2011 Volkswagen Jetta, you may have 3 options depending on the package the vehicle is equipped with:

Using the instrument cluster buttons:

VW Instrument Cluster

1. Turn the ignition off.

2. Press and hold the 0,0 button (located to the right of the instrument cluster).

3. Turn the igntion on (do not start the engine) and release the 0,0 button.  Briefly press the double square button (located to the left of the instrument cluster).

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Using the rocker switch:

VW Rocker Switch

2. Use the rocker switch on the windshield wiper lever to select "Settings" and confirm with button underneath windshield wiper lever.

3. Select the "Settings" menu followed by the "Service" submenu.  Select "Reset" and confirm.

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Using the steering wheel controls:

VW Steering Wheel Controls

3. Use the buttons on the right hand side of the multi function steering wheel

4. Select the "Settings" menu followed by the "Service" submenu.  Select "Reset" and confirm.

5. Turn the ignition off and then start the engine to verify the indicator has been reset.*vehicles equipped with a navigation system can also access the reset menu from the SETTINGS button.

https://www.oilreset.com

2004 Saturn Vue "Red Line"

To reset the 2004 Saturn Vue oil change light, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).

2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.  If the Change Engine Oil light is flashing, the system is reset.  The light will flash for up to 30 seconds or until the ignition is turned off.  If the light comes on again and stays on for 30 seconds at the next engine start, it did not reset.  You will need to reset the system again.

3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Run position

Change Engine Oil Light

https://www.oilreset.com

2014 Scion tC

To reset the 2014 Scion tC maintenance data you will need to follow these instructions:

1. Start the engine.
2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
3. While pressing the trip meter reset button, turn the ignition switch to run (one position before starting engine).
4. Continue to press and hold the button until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2014 Scion tC Trip/ODO button

https://www.oilreset.com

2013 Hyundai Santa Fe

To reset the 2013 Hyundai Santa Fe service interval, please follow these instructions to reset/setup:

1.Start the engine.
2. If a service is due the display will show "Service required". To reset this message, press the SELECT/RESET button (left pointing arrow) on the bottom right of the steering wheel for more than 1 second.
3. The service interval will be reset to the default setting.
*The service interval feature has to be turned on and set by the user by accessing the SERVICE INTERVAL menu. Press the MODE button (rectangle icons) on the bottom right of the steering wheel to highlight the SERVICE INTERVAL menu. Press the SELECT/RESET button to access the menu and use the DOWN arrow to turn the SERVICE mode on and set the applicable interval.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

2013 Hyundai Santa Fe Steering Wheel Controls

https://www.oilreset.com

2015 Toyota Corlla

The 2015 Toyota Corolla is equipped with the Toyota Maintenance Data System. After performing the oil change, the oil change indicator will need to be reset. The reset can be performed by following these instructions:

1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine).

2. Ensure Trip Metre A reading is shown (use the Trip button for vehicles with a Multi-Information display or DISP for vehicles with a drive monitor display). Turn the ignition off.

3. While pressing the Trip Meter reset button (Multi-Information Display) or while pressing the DISP button (for vehicles with a drive monitor display), press the "ENGINE START STOP" switch once (do not start engine) or turn the key in the ignition to run (one position before starting engine).

4. Continue to press and hold the button until the trip meter displays "000000".

5 Turn the ignition off and then start the engine to verify the indicator has been reset.

Use the DISP button for vehicles not equipped with the Multi-Information Display

Non Multi-Information Display

When doing the oil change and topping up fluids you will need to use the following specifications:

Use the Trip button for vehicles equipped with the Multi-Information Display

Multi-Information Display

You can cross reference the following Purolator filter numbers for your own application:

4 Cyl. 1.8L

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

https://www.oilreset.com

To replace the cabin air filter follow these steps:

2015 Toyota Cabin Air Filter Replacement

After removing the filter cover, remove the old cabin filter and take note of the the direction of the arrow on the cabin filter.  Install the new cabin filter and ensure the arrow is pointing in the same direction.  Work backwards to re-install the cabin filter.

https://www.oilreset.com

2000 Honda Civic

To reset the 2000 Honda Civic Maintenance Required light follow these instructions:

1. Reset the coloured indicator by inserting your key in the slot beside the indicator.

https://www.oilreset.com

2005 Lexus IS250

To reset the 2005 Lexus IS 250 or 350 oil change required light please follow these instructions:

1. Turn the ignition to run (one position before starting engine).

2. Bring up the odometer reading using the trip meter reset knob then the turn ignition off.

3. Hold down the trip meter reset knob while turning the ignition key to ACC (one position before starting engine).

4. Hold down the button for 5 seconds or more.  The odometer indicates "000000" and the light goes off.

5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Trip Meter Reset Button

ACC Mode

https://www.oilreset.com