The 2015 Dodge Challenger oil change light comes on when the vehicle is due or past due for an oil change service.  After performing an oil change, follow these instructions to reset the change oil light:

1. Turn the ignition to run (one position before starting engine).
2. Fully depress the accelerator pedal slowly three times within 10 seconds.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

or

1. Turn the ignition to run (one position before starting engine).
2. Push and release the DOWN arrow button to scroll downward through the main menu to “ Vehicle Info.”
3. Push and release the RIGHT arrow button to access the ”Oil Life” screen.
4. Push and hold the OK button until the “ Oil Life” screen displays.
5. Push and release the DOWN arrow button to select “ Yes,” then push and release the OK button to select reset of the Oil Life.
6. Push and release the Up arrow button to exit the submenu screen.
7. Turn the ignition off and then start the vehicle to verify the indicator has been reset.

Filter Specification

The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following Purolator filters are used on this vehicle:

Oil Specification

The oil specs for this vehicle have been taken directly from the owner’s manual. More details around oil, torque, tires, and specifications can be referenced in the owner’s manual.

Cabin Filter Replacement

Follow these instructions to replace the cabin filter: