Tired of ads? Remove them as a Premium Member. Read more

2007 NISSAN Murano Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2007 NISSAN Murano Maintenance Light Reset Instructions
2007 Nissan Murano

2007 Nissan Murano

To reset the 2007 Nissan Murano maintenance info, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Maintenance and tire pressure information will be displayed when the "MAINT" button is pushed on the centre console.
3. To display the setting of the maintenance interval, select the "Engine Oil" key using the joystick and push the "ENTER" button.
4. To reset the maintenance interval, select the "Reset" key using the joystick and push the "ENTER"
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2006 NISSAN Murano Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2006 NISSAN Murano Maintenance Light Reset Instructions
2006 Nissan Murano

2006 Nissan Murano

To reset the 2006 Nissan Murano maintenance data, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Maintenance and tire pressure information will be displayed when the "MAINT" button is pushed on the centre console.
3. To display the setting of the maintenance interval, select the "Engine Oil" key using the joystick and push the "ENTER" button.
4. To reset the maintenance interval, select the "Reset" key using the joystick and push the "ENTER"
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2007 NISSAN Maxima Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2007 NISSAN Maxima Maintenance Light Reset Instructions
2007 Nissan Maxima

2007 Nissan Maxima

To reset the 2007 Nissan Maxima maintenance info, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. When you turn the ignition key run, the system start-up warning is displayed on the screen. Read the the warning and select the OK key by pressing the ENTER button.
3. When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1
4. Select MAINTENANCE and then select the Engine Oil key using the joystick and press the ENTER button to display the screen to change the maintenance interval/RESET.
5. To return to the previous display after the MAINTENANCE NOTICE screen is displayed, press the BACK button.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.




2006 NISSAN Pathfinder Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2006 NISSAN Pathfinder Maintenance Light Reset Instructions
2006 Nissan Pathfinder

2006 Nissan Pathfinder

To reset the 2006 Nissan Pathfinder maintenance info, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. When you turn the ignition key run, the system start-up warning is displayed on the screen. Read the warning and select the OK key by pressing the ENTER button.
3. When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1
4. Select MAINTENANCE and then select the Engine Oil key using the joystick and press the ENTER button to display the screen to change the maintenance interval/RESET.
5. To return to the previous display after the MAINTENANCE NOTICE screen is displayed, press the BACK button.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.




2003 MERCURY Mountaineer Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2003 MERCURY Mountaineer Maintenance Light Reset Instructions
2003 Mercury Mountaineer

2003 Mercury Mountaineer

To reset the 2003 Mercury Mountaineer oil life, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Press the SETUP control to access the System Check function.
3. Press and release the RESET control to display "OIL LIFE XX% HOLD RESET NEW".
4. Press and hold the RESET control for 2 seconds to display "IF NEW OIL HOLD RESET".
5. Press and hold the RESET control to display "OIL LIFE SET TO 100%". Your oil life is now reset.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.




1986 PONTIAC Bonneville Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 1986 PONTIAC Bonneville Maintenance Light Reset Instructions

To reset the 1986 Pontiac Bonneville service reminder, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Press and release the SERVICE REMINDER button until the desired item is displayed.
3. When the desired item is displayed, do not release SERVICE REMINDER button.
4. After button has been pressed for approximately 10 seconds, the service interval mileage display will begin to count down in 500 mile/km intervals.
5. When desired service interval mileage is reached, release button.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.




2007 NISSAN Pathfinder Maintenance Light Reset Instructions

Instructions Comments Off on 2007 NISSAN Pathfinder Maintenance Light Reset Instructions
2007 Nissan Pathfinder

2007 Nissan Pathfinder

To reset the 2007 Nissan Pathfinder maintenance info, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. When you turn the ignition key run, the system start-up warning is displayed on the screen. Read the warning and select the OK key by pressing the ENTER button.
3. When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1
4. Select MAINTENANCE and then select the Engine Oil key using the joystick and press the ENTER button to display the screen to change the maintenance interval/RESET.
5. To return to the previous display after the MAINTENANCE NOTICE screen is displayed, press the BACK button.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.




2006 NISSAN Z Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2006 NISSAN Z Maintenance Light Reset Instructions
2006 Nissan 350z

2006 Nissan 350z

To reset the 2006 Nissan Z maintenance info, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. When you turn the ignition key run, the system start-up warning is displayed on the screen. Read the the warning and select the OK key by pressing the ENTER button.
3. When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1
4. Select MAINTENANCE and then select the Engine Oil key using the joystick and press the ENTER button to display the screen to change the maintenance interval/RESET.
5. To return to the previous display after the MAINTENANCE NOTICE screen is displayed, press the BACK button.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.




2003 MERCEDES G – Class Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2003 MERCEDES G – Class Maintenance Light Reset Instructions
2003 Mercedes G Class
2003 Mercedes G Class

To reset the 2003 Mercedes G Class maintenance info, please follow these instructions:

1. Turn the ignition to position 1 (one position before starting the engine).
2. Press button (UP arrow) or (DOWN arrow) on the multifunction steering wheel until the FSS indicator appears in the multifunction display.
3. Press the reset knob for about 4 seconds. The message appears in the tachometer "DO YOU WANT TO RESET SERVICE INTERVAL? CONFIRM BY PRESSING R".
4. To confirm, hold down the reset knob until you hear a signal. The service indicator now displays the reset interval.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2004 MERCURY Monterey Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2004 MERCURY Monterey Maintenance Light Reset Instructions
2004 Mercury Monterey

2004 Mercury Monterey

To reset the 2004 Mercury Monterey oil life, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Press the STATUS control to access the System Check function.
3. Press RESET to reset oil %.
4. Press and hold the RESET control to set to 100%. After a successful reset, the message centre will display OIL LIFE SET TO 100%.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.





Remove ads as a Premium Member. Read More