2016-Cadillac ATS V

To reset the 2016 Cadillac ATS oil life after a oil change, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. *Use the DIC controls on the right side of the steering wheel to display the REMAINING OIL LIFE.
3. Press SEL on the DIC controls.
4. Hold SEL down for a few seconds to reset the oil life to 100%.
5. Turn the ignition off and start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.

Cadillac ATS V Interior

1. Start the engine.
2. Press the CAR button to access the service menu.
3. From the CAR menu select CAR SYSTEMS.
4. From the CAR SYSTEMS menu select SERVICE INTERVALS.
5. Select RESET OIL CHANGE INTERVAL and confirm.
6. Turn off the igntion.
7. Start the engine and verify the indicator has been reset.

2016 Cadillac CTS

To reset the 2016 Cadillac CTS remaining oil life after a oil change, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. *Use the DIC controls on the right side of the steering wheel to display the REMAINING OIL LIFE.
3. Press SEL on the DIC controls.
4. Hold SEL down for a few seconds to reset the oil life to 100%.
5. Turn the ignition off and start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.

2011 Audi A6

To reset the 2011 Audi A6 oil change interval after a oil change, please follow these instructions:

1. Start the engine.
2. Press the CAR button to access the service menu.
3. From the CAR menu select CAR SYSTEMS.
4. From the CAR SYSTEMS menu select SERVICE INTERVALS.
5. Select RESET OIL CHANGE INTERVAL and confirm.
6. Turn off the igntion.
7. Start the engine and verify the indicator has been reset.

1998 Audi A6

To reset the 1998 Audi A6 service inspection light after a oil change, please follow these instructions:

Manual Reset using Odometer and Reset Knobs:
1. Turn off the ignition.
2. Locate the Service Interval Display, which is below the odometer.
3. Do the following to display the service OIL message in the Service interval display:
i) Press and hold the TRIP ODOMETER RESET knob.
ii) Turn on the ignition - do not start the engine.
iii) Release the TRIP ODOMETER RESET knob.
4. Pull out the CLOCK ADJUSTMENT knob.
5. Press and hold the TRIP ODOMETER RESET knob until the message changes to service INSP, then release the knob.
6. Pull out the CLOCK ADJUSTMENT knob, hold for 2 seconds and release.
7. Turn off the ignition.
8. Start the engine and verify indicator has been reset.

Manual Reset using Odometer and Reset Knobs:
1. Turn off the ignition.
2. Locate the Service Interval Display, which is below the odometer.
3. Do the following to display the service OIL message in the Service interval display:
i) Press and hold the TRIP ODOMETER RESET knob.
ii) Turn on the ignition - do not start the engine.
iii) Release the TRIP ODOMETER RESET knob.
4. Pull out the CLOCK ADJUSTMENT knob.
5. Press and hold the TRIP ODOMETER RESET knob until the message changes to service INSP, then release the knob.
6. Pull out the CLOCK ADJUSTMENT knob, hold for 2 seconds and release.
7. Turn off the ignition.
8. Start the engine and verify indicator has been reset.

*No manual reset available. A diagnostic tool is required.

2010 Audi A6

To reset the 2010 Audi A6 oil change interval after a oil change, please follow these instructions:

1. Start the engine.
2. Press the CAR button to access the service menu.
3. From the CAR menu select CAR SYSTEMS.
4. From the CAR SYSTEMS menu select SERVICE INTERVALS.
5. Select RESET OIL CHANGE INTERVAL and confirm.
6. Turn off the igntion.
7. Start the engine and verify the indicator has been reset.

2016 Buick Enclave

To reset the 2016 Buick Enclave oil life remaining % after a oil change, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Press the vehicle information button (i) until OIL LIFE REMAINING displays.
3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
4. Start the engine and verify CHANGE OIL SOON light goes out (if this does not happen, turn off the engine and repeat steps).

Button Location

2010 Audi A5

To reset the 2010 Audi A5 oil change interval after a oil change, please follow these instructions:

1. Start the engine.
2. Press the CAR button to access the service menu.
3. From the CAR menu select CAR SYSTEMS.
4. From the CAR SYSTEMS menu select SERVICE INTERVALS.
5. Select RESET OIL CHANGE INTERVAL and confirm.
6. Turn off the igntion.
7. Start the engine and verify the indicator has been reset.