1.Start the engine.
2016 Honda CR-V Maintenance Light Reset
Automotive Comments Off on 2016 Honda CR-V Maintenance Light ResetTo reset the 2016 Honda CR-V maintenance light after an oil change, please follow these instructions:
Multi-Information Display:
1. Turn the ignition to run (one position before starting engine).
2. Press the (up/down) button to select Vehicle Settings, then press the SEL/RESET button.
3. Press the (up/down) button until Maintenance Reset appears on the display.
4. Press the SEL/RESET button - the oil life reset mode is displayed on the multi-information display.
5. Select Reset with the (up/down) button, then press the SEL/RESET button. The displayed maintenance items disappear, and the engine oil life display returns to 100%.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.
or non Multi-Information Display:
1. Turn the ignition to run (one position before starting engine).
2. Press the SELECT/RESET knob repeatedly until the engine oil life indicator is displayed.
3. Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink.
4. Press the SELECT/RESET knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life will reset to 100.
2016 GMC Terrrain Remaining Oil Life Reset
Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 GMC Terrrain Remaining Oil Life ResetTo reset the 2016 GMC Terrain remaining oil life after an oil change, please follow these instructions:
With Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Press the MENU button until vehicle information menu is displayed then scroll through the menu with the down arrow until Remaining Oil Life is selected then press SET/CLR (check button) to select.
3. Use up or down arrow to select YES to reset.
4. Confirm reset by pressing SET/CLR button.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Without Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Engine Oil Soon message goes off the system is reset.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
2016 Ford Edge Oil Life Reset
Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 Ford Edge Oil Life ResetTo reset the Ford Edge oil life after an oil change, please follow these instructions:
1. Turn the ignition to run (one position before starting engine).
2. Use the steering wheel controls to scroll to the Settings Menu and press the right arrow button.
3. Scroll to the Vehicle Menu and press the right arrow button.
4. Scroll to Oil Life and press the right arrow button.
5. Hold the OK button unitl the display shows "Reset Successful".
6. Turn the ignition off and then start the engine to verify the indicator has been reset.
2016 Fiat 500L Oil Change Indicator Reset
Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 Fiat 500L Oil Change Indicator ResetTo reset the 2016 Fiat 500L oil change indicator after an oil change, please follow these instructions:
1. Turn the ignition to run (one position before starting engine).
2. Fully depress the accelerator pedal slowly three times within 10 seconds.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.
2016 Dodge Dart Oil Life Reset
Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 Dodge Dart Oil Life ResetTo reset the 2016 Dodge Dart oil life after an oil change, please follow these instructions:
1. Turn the ignition to run (one position before starting engine).
2. Fully depress the accelerator pedal slowly three times within 10 seconds.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.
or
1. Turn the ignition to run (one position before starting engine).
2. Push and release the DOWN ? arrow button to scroll downward through the main menu to “Ve- hicle Info”.
3. Push and release the RIGHT ? arrow button to access the ”Oil Life” screen.
4. Push and hold the RIGHT arrow button to reset the gauge and numeric display to 100% for ”Oil Life.”
5. Push and release the Up arrow button to exit the EVIC screen.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.
2016 Chevrolet Trax Remaining Oil Life Reset
Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 Chevrolet Trax Remaining Oil Life ResetTo reset the 2016 Chevrolet Trax remaining oil life after an oil change, please follow these instructions:
1. Turn the ignition to run (one position before starting engine).
2. Press the MENU button located on the turn signal lever.
3. Use the thumbwheel to scroll to REMAINING OIL LIFE.
4. To reset the engine oil life system, press the SET/CLR button while the oil life display is active. After a few seconds, there will be a single chime and the oil life will be reset to 100%.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Volvo XC60 Service Reminder Indicator Reset
Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on Volvo XC60 Service Reminder Indicator ResetTo reset the Volvo XC60 service reminder indicator after an oil change, please follow these instructions:
1. Turn the ignition to position I.
2. Press and hold in the OK button on the left steering wheel stalk.
3. Continue to hold OK, turn the ignition switch to position II.
4. Wait for 10 seconds. Release the OK button when the information light starts to flash.
5. Turn the ignition off for 3 minutes and then start the engine to verify the indicator has been reset.
2016 Volkswagen Golf Oil Change Service Reset
Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 Volkswagen Golf Oil Change Service ResetTo reset the 2016 Volkswagen Golf oil change service reminder, please follow these instructions:
1) With the ignition turned off, hold the 0.0 button pressed.
2) Switch on the ignition. Wait until “Reset oil change service?” appears in the display.
3) Release the button 0.0 button. The service interval display is now in reset mode.
4) Push the 0.0 button once shortly. After a brief period, the display switches back to the normal display.
5) Turn the ignition off and start the engine to verify the indicator has been reset.
2016 Toyota 4Runner Maintenance Data Reset
Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 Toyota 4Runner Maintenance Data ResetTo reset the 2016 Toyota 4Runner maintenance data after an oil change, please follow these instructions:
1. Start the engine and bring up the trip meter A reading.
Vehicles with smart key system:
2. Turn the “ENGINE START STOP” switch off.
3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Vehicles without smart key system:
2. Turn the ignition switch off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.