May 31
1. Turn the ignition to run (one position before starting engine).
2. Display the OIL LIFE INDEX on the Driver Information Centre.
3. Press and hold the RESET button for 5 seconds. The message RESET displays and the OIL LIFE INDEX changes to 100% to indicate the system is reset.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
May 30
1. Turn the ignition to run (one position before starting engine).
2. Push the SET/RESET button until OIL is displayed on the Driver Information Centre.
3. Once OIL is displayed, push and hold the SET/RESET button for 5 seconds until 100% appears.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
May 29
1. Turn the ignition to run (one position before starting engine).
2. Press the ENG button on the DIC control panel until the OIL LIFE % appears.
3. Press and hold the RESET button for 5 seconds. The OIL LIFE 100% message appears.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
May 28
1. Turn the ignition to run (one position before starting engine).
2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
3. Press the SET/CLR button to reset the oil life to 100%.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
May 27
With Driver Information Centre:
1. Turn the ignition to run (one position before starting engine).
2. Press the MODE button until OIL LIFE LEFT displays.
3. Press and hold the SET button until 100% is displayed. This will be followed by three chimes to indicate the system is reset.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
Without Driver Information Centre:
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. Turn the ignition to off.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
May 26
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. Turn the ignition to off.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
May 25
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the CHANGE OIL SOON indicator flashes
4. Turn the ignition to off.
5. Turn the ignition off and start the engine to verify the indicator has been reset.
May 24
With Driver Information Centre:
1. Turn the ignition to run (one position before starting engine).
2. Press the MODE button until OIL LIFE LEFT displays.
3. Press and hold the SET button until 100% is displayed. This will be followed by three chimes to indicate the system is reset.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
Without Driver Information Centre:
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. Turn the ignition to off.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
May 23
You can also read our Blog on how to reset the light and service this vehicle.
1. Turn the ignition to run (one position before starting engine).
2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
3. Press the SET/CLR button to reset the oil life to 100%.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
May 22
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the CHANGE OIL SOON indicator flashes
4. Turn the ignition to off.
5. Turn the ignition off and start the engine to verify the indicator has been reset.
