1. Turn the ignition to run (one position before starting engine).
2. Press the TRIP button on the DIC switch repeatedly until OIL LIFE REMAINING displays.
3. Press and hold the RESET button on the DIC switch for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. *Use the DIC MENU button to display OIL LIFE REMAINING on the DIC.
3. Press the Set/Reset button and hold for two seconds to clear the CHANGE ENGINE OIL SOON message and reset the oil life to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.

1. Turn the ignition to run (one position before starting engine).
2. Reset the Engine Oil Life Index by pressing the RANGE and RESET keys on the Fuel Data Centre for 5 to 60 seconds.
3. Release the keys. The indicator will automatically reset to 100. The CHANGE OIL SOON light will flash 4 times to indicate it has been reset to 100.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Press the INFORMATION button several times until OIL LIFE INDEX message appears.
3. Press and hold the RESET button until the display resets to 100.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Display the OIL LIFE REMAINING on the DIC.
3. Press and hold the SET/RESET button in the DIC for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Press the INFORMATION button several times until OIL LIFE INDEX message appears.
3. Press and hold the RESET button until the display resets to 100.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Display the Oil Life message by pressing the INFO button.
3. Press and hold the RESET button until the display shows 100% Engine Oil Life.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

With Base Audio System:
1. Turn the ignition to run (one position before starting engine).
2. Press the up or down arrow on the INFO button located to the right of the Driver Information Centre (DIC) display to access the DIC menu.
3. Once 100% ENGINE OIL LIFE menu is highlighted return to 100 and the oil life indicator will be reset.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

With Navigation System:
1. Turn the ignition to run (one position before starting engine).
2. Turn the system on by pressing the PWR/VOL button.
3. Press the INFO button located to the left of the display to access the vehicle information menu.
4. Turn the TUNE/SEL knob located to the lower right of the display until Engine Oil Life is highlighted.
5. Press the knob once to select it.
6. Once the 100% Engine Oil Life is displayed the upper right corner of the display. The percentage will return to 100 and the oil life indicator will be reset.
7. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. *Use the DIC MENU button to display OIL LIFE REMAINING on the DIC.
3. Press the Set/Reset button and hold for two seconds to clear the CHANGE ENGINE OIL SOON message and reset the oil life to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.

1. Turn the ignition to run (one position before starting engine).
2. Press the INFO button on the DIC to display ENGINE OIL LIFE.
3. Press and hold the INFO RESET button on the DIC until the display reads 100% ENGINE OIL LIFE.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.