1. Turn the ignition to run (one position before starting engine).
2. Press RANGE and FUEL USED simultaneously to display oil life index.
3. Press RANGE and RESET simultaneously until the CHANGE OIL SOON light flashes (hold about 5 seconds).
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
2. Press the INFORMATION button several times until OIL LIFE INDEX message appears.
3. Press and hold the RESET button until the display resets to 100.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
With Base Audio System:
1. Turn the ignition to run (one position before starting engine).
2. Press the up or down arrow on the INFO button located to the right of the Driver Information Centre (DIC) display to access the DIC menu.
3. Once 100% ENGINE OIL LIFE menu is highlighted return to 100 and the oil life indicator will be reset.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
With Navigation System:
1. Turn the ignition to run (one position before starting engine).
2. Turn the system on by pressing the PWR/VOL button.
3. Press the INFO button located to the left of the display to access the vehicle information menu.
4. Turn the TUNE/SEL knob located to the lower right of the display until Engine Oil Life is highlighted.
5. Press the knob once to select it.
6. Once the 100% Engine Oil Life is displayed the upper right corner of the display. The percentage will return to 100 and the oil life indicator will be reset.
7. Turn the ignition off and then start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
2. Press the range button until the OIL LIFE INDEX is displayed.
3. Press and hold the AVERAGE SPEED and RANGE buttons until the display resets to 100.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
2. Press RANGE and FUEL USED simultaneously to display oil life index.
3. Press RANGE and RESET simultaneously until the CHANGE OIL SOON light flashes (hold about 5 seconds).
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
You can also read our Blog on how to reset the light and service this vehicle.
1. Turn the ignition to run (one position before starting engine).
2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
3. Press the SET/CLR button to reset the oil life to 100%.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
2. Display the OIL LIFE REMAINING on the DIC.
3. Press and hold the SET/RESET button in the DIC for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
2. Press the range button until the OIL LIFE INDEX is displayed.
3. Press and hold the AVERAGE SPEED and RANGE buttons until the display resets to 100.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
2. Press the range button until the OIL LIFE INDEX is displayed.
3. Press and hold the AVERAGE SPEED and RANGE buttons until the display resets to 100.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
2. Display the OIL LIFE REMAINING on the DIC.
3. Press and hold the SET/RESET button in the DIC for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
