Tired of ads? Remove them as a Premium Member. Read more

2010 CHEVROLET HHR Maintenance Light Reset Instructions

Instructions Comments Off on 2010 CHEVROLET HHR Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press the INFO and RESET (arrow) buttons on the DIC at the same time to enter the personalization menu.
3. Press the INFORMATION button to scroll through the menu until OIL LIFE RESET is displayed.
4. Press and hold the RESET button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

or

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If CHANGE ENGINE OIL light does not go out, turn off the ignition and repeat steps 1-3.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2009 CHEVROLET HHR Maintenance Light Reset Instructions

Instructions Comments Off on 2009 CHEVROLET HHR Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press the INFO and RESET (arrow) buttons on the DIC at the same time to enter the personalization menu.
3. Press the INFO button to scroll through the menu until OIL LIFE RESET is displayed.
4. Press and hold the RESET button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2008 CHEVROLET HHR Maintenance Light Reset Instructions

Instructions Comments Off on 2008 CHEVROLET HHR Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press the INFO and RESET (arrow) buttons on the DIC at the same time to enter the personalization menu.
3. Press the INFO button to scroll through the menu until OIL LIFE RESET is displayed.
4. Press and hold the RESET button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2007 CHEVROLET HHR Maintenance Light Reset Instructions

Instructions Comments Off on 2007 CHEVROLET HHR Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press the INFO and RESET (arrow) buttons on the DIC at the same time to enter the personalization menu.
3. Press the INFO button to scroll through the menu until OIL LIFE RESET is displayed.
4. Press and hold the RESET button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2006 CHEVROLET HHR Maintenance Light Reset Instructions

Instructions Comments Off on 2006 CHEVROLET HHR Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press the INFO and RESET (arrow) buttons on the DIC at the same time to enter the personalization menu.
3. Press the INFO button to scroll through the menu until OIL LIFE RESET is displayed.
4. Press and hold the RESET button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2013 CHEVROLET Cruze Maintenance Light Reset Instructions

Instructions Comments Off on 2013 CHEVROLET Cruze Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the
thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
3. Press the SET/CLR button to reset the oil life to 100%. When prompted select YES or NO. Press the SET/CLR button to confirm.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2012 CHEVROLET Cruze Maintenance Light Reset Instructions

Instructions Comments Off on 2012 CHEVROLET Cruze Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the
thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
3. Press the SET/CLR button to reset the oil life to 100%. When prompted select YES or NO. Press the SET/CLR button to confirm.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2011 CHEVROLET Cruze Maintenance Light Reset Instructions

Instructions Comments Off on 2011 CHEVROLET Cruze Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the
thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
3. Press the SET/CLR button to reset the oil life to 100%. When prompted select YES or NO. Press the SET/CLR button to confirm.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2013 CHEVROLET Corvette Maintenance Light Reset Instructions

Instructions Comments Off on 2013 CHEVROLET Corvette Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press the TRIP button so the oil life % is displayed.
3. Press the RESET and hold for 2 seconds. OIL LIFE REMAINING 100% will appear.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2012 CHEVROLET Corvette Maintenance Light Reset Instructions

Instructions Comments Off on 2012 CHEVROLET Corvette Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press the TRIP button so the oil life % is displayed.
3. Press the RESET and hold for 2 seconds. OIL LIFE REMAINING 100% will appear.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.





Remove ads as a Premium Member. Read More