1. Turn the ignition to run (one position before starting engine). 2. Repeatedly push the TRIP/RESET button until OIL is displayed on the DIC. 3. Push and hold the TRIP/RESET button for 5 seconds. The number will disappear and be replaced by 100%. 4. Turn the ignition off and then start the engine to verify […]

1. Turn the ignition to run (one position before starting engine). 2. Repeatedly push the TRIP/RESET button until OIL is displayed on the DIC. 3. Push and hold the TRIP/RESET button for 5 seconds. The number will disappear and be replaced by 100%. 4. Turn the ignition off and then start the engine to verify

1. Turn the ignition to run (one position before starting engine). 2. Repeatedly push the TRIP/RESET button until OIL is displayed on the DIC. 3. Push and hold the TRIP/RESET button for 5 seconds. The number will disappear and be replaced by 100%. 4. Turn the ignition off and then start the engine to verify

1. Turn the ignition to run (one position before starting engine). 2. Repeatedly push the TRIP/RESET button until OIL is displayed on the DIC. 3. Push and hold the TRIP/RESET button for 5 seconds. The number will disappear and be replaced by 100%. 4. Turn the ignition off and then start the engine to verify

1. Turn the ignition to run (one position before starting engine). 2. Press the FUEL INFORMATION button until ENGINE OIL LIFE appears on the DIC. 3. Press and hold the SELECT button. The engine oil life % will change to 100. 4. Turn the ignition off and then start the engine to verify the indicator

1. Turn the ignition to run (one position before starting engine). 2. Press the MENU button on the turn signal lever to show Remaining Oil Life on the display. 3. To reset the engine oil life system, press the SET/CLR button while the oil life display is visible. After a few seconds, there will be

1. Turn the ignition to run (one position before starting engine). 2. Display the OIL LIFE REMAINING on the DIC. 3. Press and hold the SET/RESET button on the DIC for more than 5 seconds. The oil life will change to 100%. 4. Turn the ignition off and then start the engine to verify the

1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If CHANGE ENGINE OIL light does not go out, turn off the ignition and repeat steps 1-3. 4. Turn the ignition off and then start the engine

1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If CHANGE ENGINE OIL light does not go out, turn off the ignition and repeat steps 1-3. 4. Turn the ignition off and then start the engine

1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If CHANGE ENGINE OIL light does not go out, turn off the ignition and repeat steps 1-3. 4. Turn the ignition off and then start the engine