Tired of ads? Remove them as a Premium Member. Read more

2007 Explorer Maintenance Light Reset Instructions

Instructions Comments Off on 2007 Explorer Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Enter SYSTEM CHECK to display "OIL XXX% OIL LIFE OK".
3. Press RESET button to display "HOLD RESET IF NEW OIL".
4. Press and hold the RESET button for more than two seconds. Oil life is set to 100% and "OIL CHANGE SET TO 100%" is displayed.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2006 Explorer Maintenance Light Reset Instructions

Instructions Comments Off on 2006 Explorer Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Enter SYSTEM CHECK to display "OIL XXX% OIL LIFE OK".
3. Press RESET button to display "HOLD RESET IF NEW OIL".
4. Press and hold the RESET button for more than two seconds. Oil life is set to 100% and "OIL CHANGE SET TO 100%" is displayed.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2005 Explorer Maintenance Light Reset Instructions

Instructions Comments Off on 2005 Explorer Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Select this function from the SETUP control "PRESS RESET AT OIL CHANGE".
3. Press RESET control to reset oil change.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2004 Explorer Maintenance Light Reset Instructions

Instructions Comments Off on 2004 Explorer Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Select this function from the SETUP control "PRESS RESET AT OIL CHANGE".
3. Press RESET control to reset oil change.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2003 Explorer Maintenance Light Reset Instructions

Instructions Comments Off on 2003 Explorer Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press the SETUP control to access the System Check function.
3. Press and release the RESET control to display "OIL LIFE XX% HOLD RESET NEW".
4. Press and hold the RESET control for 2 seconds to display "IF NEW OIL HOLD RESET".
5. Press and hold the RESET control to display "OIL LIFE SET TO 100%". Your oil life is now reset.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.




2002 Explorer Maintenance Light Reset Instructions

Instructions Comments Off on 2002 Explorer Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press the SETUP control to access the System Check function.
3. Press and release the RESET control to display "OIL LIFE XX% HOLD RESET NEW".
4. Press and hold the RESET control for 2 seconds to display "IF NEW OIL HOLD RESET".
5. Press and hold the RESET control to display "OIL LIFE SET TO 100%". Your oil life is now reset.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.




2001 Explorer Maintenance Light Reset Instructions

Instructions Comments Off on 2001 Explorer Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display "OIL LIFE RESET TO 100%".
3. Turn the ignition off and then start the engine to verify the indicator has been reset.




2000 Explorer Maintenance Light Reset Instructions

Instructions Comments Off on 2000 Explorer Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display "OIL LIFE RESET TO 100%".
3. Turn the ignition off and then start the engine to verify the indicator has been reset.




1999 Explorer Maintenance Light Reset Instructions

Instructions Comments Off on 1999 Explorer Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display "OIL LIFE RESET TO 100%".
3. Turn the ignition off and then start the engine to verify the indicator has been reset.




2013 Expedition Maintenance Light Reset Instructions

Instructions Comments Off on 2013 Expedition Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press and release SETUP to display "OIL LIFE XXX% HOLD RESET = NEW".
3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.





Remove ads as a Premium Member. Read More