1. Turn the ignition to run (one position before starting engine).
2. Push the "TRIP" button to change the trip meter display to blank. Turn the ignition off.
3. While pressing the trip meter "RESET" button, turn ignition to run (one position before starting engine). Continue to hold the button for longer than 5 seconds.
4. "Mileage Reset" appears on the display, the master warning light comes on, and a warning tone sounds.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Push the "TRIP" button to change the trip meter display to blank. Turn the ignition off.
3. While pressing the trip meter "RESET" button, turn ignition to run (one position before starting engine). Continue to hold the button for longer than 5 seconds.
4. "Mileage Reset" appears on the display, the master warning light comes on, and a warning tone sounds.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Press ODO/TRIP button to display odometer mode. Turn ignition off.
3. While pressing ODO/TRIP button, turn ignition to run (one position before starting engine). Continue to hold the button for longer than 5 seconds.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Start the engine. Switch the display to the odometer reading. Turn the engine off.
2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the multi information displays “COMPLETE”.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Start the engine. Switch the display to the odometer reading. Turn the engine off.
2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the multi information displays “COMPLETE”.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the odometer reading. Turn the ignition off.
2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the trip meter displays “000000”.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the odometer reading. Turn the ignition off.
2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the trip meter displays “000000”.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the odometer reading. Turn the ignition off.
2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the trip meter displays “000000”.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the odometer reading. Turn the ignition off.
2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the trip meter displays “000000”.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the odometer reading. Turn the ignition off.
2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the trip meter displays “000000”.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.