1. Turn the ignition to position 1 (one position before starting the engine).
2. Press button (UP arrow) or (DOWN arrow) on the multifunction steering wheel until the FSS indicator with (Single Wrench) or (Double Wrench) and the service deadline appears in the multifunction display.
3. Press the reset knob to the right in the instrument cluster for about 2 seconds. This message appears in the multifunction display: "SERVICE INTERVAL? RESET WITH R BUTTON".
4. To confirm hold down the reset button until you hear a signal. The service indicator now displays the reset interval.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1 (one position before starting the engine).
2. Press button (UP arrow) or (DOWN arrow) on the multifunction steering wheel until the FSS indicator with (Single Wrench) or (Double Wrench) and the service deadline appears in the multifunction display.
3. Press the reset knob to the right in the instrument cluster for about 2 seconds. This message appears in the multifunction display: "SERVICE INTERVAL? RESET WITH R BUTTON".
4. To confirm hold down the reset button until you hear a signal. The service indicator now displays the reset interval.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1 (one position before starting the engine).
2. Press button (UP arrow) or (DOWN arrow) on the multifunction steering wheel until the FSS indicator with (Single Wrench) or (Double Wrench) and the service deadline appears in the multifunction display.
3. Press the reset knob to the right in the instrument cluster for about 2 seconds. This message appears in the multifunction display: "SERVICE INTERVAL? RESET WITH R BUTTON".
4. To confirm hold down the reset button until you hear a signal. The service indicator now displays the reset interval.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1 (one position before starting the engine).
2. Press button (UP arrow) or (DOWN arrow) on the multifunction steering wheel until the FSS indicator with (Single Wrench) or (Double Wrench) and the service deadline appears in the multifunction display.
3. Press the reset knob to the right in the instrument cluster for about 2 seconds. This message appears in the multifunction display: "SERVICE INTERVAL? RESET WITH R BUTTON".
4. To confirm hold down the reset button until you hear a signal. The service indicator now displays the reset interval.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1 (one position before starting the engine).
2. Press button (UP arrow) or (DOWN arrow) on the multifunction steering wheel until the FSS indicator with (Single Wrench) or (Double Wrench) and the service deadline appears in the multifunction display.
3. Press the reset knob to the right in the instrument cluster for about 2 seconds. This message appears in the multifunction display: "SERVICE INTERVAL? RESET WITH R BUTTON".
4. To confirm hold down the reset button until you hear a signal. The service indicator now displays the reset interval.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1 (one position before starting the engine).
2. Within 4 seconds press button (1) left of speedometer twice.
3. The present status for days or distance displays, within 10 seconds turn key in steering lock to position O.
4. Press and hold button (1), while turning key in steering lock to position 2 again. The present status for days or distance displays once more.
5. Continue to hold button (1) for approximately 10 seconds until a signal sounds and the display shows 10 000 mils or 15 000km. Release button (1).
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1 (one position before starting the engine).
2. Within 4 seconds press button (1) left of speedometer twice.
3. The present status for days or distance displays, within 10 seconds turn key in steering lock to position O.
4. Press and hold button (1), while turning key in steering lock to position 2 again. The present status for days or distance displays once more.
5. Continue to hold button (1) for approximately 10 seconds until a signal sounds and the display shows 10 000 mils or 15 000km. Release button (1).
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1 (one position before starting the engine).
2. Within 4 seconds press button (1) left of speedometer twice.
3. The present status for days or distance displays, within 10 seconds turn key in steering lock to position O.
4. Press and hold button (1), while turning key in steering lock to position 2 again. The present status for days or distance displays once more.
5. Continue to hold button (1) for approximately 10 seconds until a signal sounds and the display shows 10 000 mils or 15 000km. Release button (1).
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1 (one position before starting the engine).
2. The kilometre/mileage counter must appear in the display. If not displayed, press the down button repeatedly until displayed.
3. Press the left arrow button repeatedly until "trip" is displayed.
4. Press and hold phone button and then within 1 second press and hold down the OK button. Hold for 5 seconds then the workshop menu will be displayed "Vehicle data, Dynamometer Test, Change Brake Lining and ASSYST PLUS".
5. Select ASSYST PLUS and confirm with OK button.
6. Select FULL SERVICE and confirm with OK button.
7. Select CONFIRM SERV and confirm with OK button.
8. Select the oil used "Oil qual. 229.3" or "Oil qual. 229.5" and confirm with OK button.
9. Select YES and confirm with OK button.
10. Select CONFIRMATION and confirm selection by pressing OK button. "Full service carried out" appears in the display.
11. Press the OK button and exit the menu.
12. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Close all doors, windows, hood and trunk when performing reset

1. Turn the ignition to position 1 (one position before starting the engine).
2. The kilometre/mileage counter must appear in the display. If not displayed, press the down button repeatedly until displayed.
3. Press the left arrow button repeatedly until "trip" is displayed.
4. Press and hold phone button and then within 1 second press and hold down the OK button. Hold for 5 seconds then the workshop menu will be displayed "Vehicle data, Dynamometer Test, Change Brake Lining and ASSYST PLUS".
5. Select ASSYST PLUS and confirm with OK button.
6. Select FULL SERVICE and confirm with OK button.
7. Select CONFIRM SERV and confirm with OK button.
8. Select the oil used "Oil qual. 229.3" or "Oil qual. 229.5" and confirm with OK button.
9. Select YES and confirm with OK button.
10. Select CONFIRMATION and confirm selection by pressing OK button. "Full service carried out" appears in the display.
11. Press the OK button and exit the menu.
12. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Close all doors, windows, hood and trunk when performing reset