1. Switch ignition on (do not start engine) and immediately press knob to left of speedometer twice within 4 seconds.
2. Present status for days or distance is now displayed. Within 10 seconds, turn key in steering wheel lock to position 0.
3. Press and hold button to the left of speedometer, while turning key in steering lock to position 2 again. The present status for days or distance is displayed again. Continue to hold button until you hear a signal (approximately 10 seconds).
4. Release button.
5. Service interval displays the reset interval.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Switch ignition on (do not start engine) and immediately press knob to left of speedometer twice within 4 seconds.
2. Present status for days or distance is now displayed. Within 10 seconds, turn key in steering wheel lock to position 0.
3. Press and hold button to the left of speedometer, while turning key in steering lock to position 2 again. The present status for days or distance is displayed again. Continue to hold button until you hear a signal (approximately 10 seconds).
4. Release button.
5. Service interval displays the reset interval.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Switch ignition on (do not start engine) and immediately press knob to left of speedometer twice within 4 seconds.
2. Present status for days or distance is now displayed. Within 10 seconds, turn key in steering wheel lock to position 0.
3. Press and hold button to the left of speedometer, while turning key in steering lock to position 2 again. The present status for days or distance is displayed again. Continue to hold button until you hear a signal (approximately 10 seconds).
4. Release button.
5. Service interval displays the reset interval.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1 (one position before starting the engine).
2. Within 4 seconds press button (1) left of speedometer twice.
3. The present status for days or distance displays, within 10 seconds turn key in steering lock to position O.
4. Press and hold button (1), while turning key in steering lock to position 2 again. The present status for days or distance displays once more.
5. Continue to hold button (1) for approximately 10 seconds until a signal sounds and the display shows 10 000 mils or 15 000km. Release button (1).
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1 (one position before starting the engine).
2. Within 4 seconds press button (1) left of speedometer twice.
3. The present status for days or distance displays, within 10 seconds turn key in steering lock to position O.
4. Press and hold button (1), while turning key in steering lock to position 2 again. The present status for days or distance displays once more.
5. Continue to hold button (1) for approximately 10 seconds until a signal sounds and the display shows 10 000 mils or 15 000km. Release button (1).
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1 (one position before starting the engine).
2. The kilometre/mileage counter must appear in the display. If not displayed, press the down button repeatedly until displayed.
3. Press the left arrow button repeatedly until "trip" is displayed.
4. Press and hold phone button and then within 1 second press and hold down the OK button. Hold for 5 seconds then the workshop menu will be displayed "Vehicle data, Dynamometer Test, Change Brake Lining and ASSYST PLUS".
5. Select ASSYST PLUS and confirm with OK button.
6. Select FULL SERVICE and confirm with OK button.
7. Select CONFIRM SERV and confirm with OK button.
8. Select the oil used "Oil qual. 229.3" or "Oil qual. 229.5" and confirm with OK button.
9. Select YES and confirm with OK button.
10. Select CONFIRMATION and confirm selection by pressing OK button. "Full service carried out" appears in the display.
11. Press the OK button and exit the menu.
12. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Close all doors, windows, hood and trunk when performing reset

1. Turn the ignition to position 1 (one position before starting the engine).
2. The kilometre/mileage counter must appear in the display. If not displayed, press the down button repeatedly until displayed.
3. Press the left arrow button repeatedly until "trip" is displayed.
4. Press and hold phone button and then within 1 second press and hold down the OK button. Hold for 5 seconds then the workshop menu will be displayed "Vehicle data, Dynamometer Test, Change Brake Lining and ASSYST PLUS".
5. Select ASSYST PLUS and confirm with OK button.
6. Select FULL SERVICE and confirm with OK button.
7. Select CONFIRM SERV and confirm with OK button.
8. Select the oil used "Oil qual. 229.3" or "Oil qual. 229.5" and confirm with OK button.
9. Select YES and confirm with OK button.
10. Select CONFIRMATION and confirm selection by pressing OK button. "Full service carried out" appears in the display.
11. Press the OK button and exit the menu.
12. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Close all doors, windows, hood and trunk when performing reset

1. Turn the ignition to position 1.
2. Press the system selection button (3) until the mileage is displayed.
3. Press the reset button R and hold for 3 seconds.
4. The message "DO YOU WANT TO RESET THE SERVICE INTERVAL? CONFIRM WITH R BUTTON" displays.
5. Press the R button again.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1.
2. Press the system selection button (3) until the mileage is displayed.
3. Press the reset button R and hold for 3 seconds.
4. The message "DO YOU WANT TO RESET THE SERVICE INTERVAL? CONFIRM WITH R BUTTON" displays.
5. Press the R button again.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1.
2. Press the system selection button (3) until the mileage is displayed.
3. Press the reset button R and hold for 3 seconds.
4. The message "DO YOU WANT TO RESET THE SERVICE INTERVAL? CONFIRM WITH R BUTTON" displays.
5. Press the R button again.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.