1. Turn the ignition to run (one position before starting engine). 2. With the wrench symbol and distance to oil change displayed press the TRIP button for 3 seconds until the wrench symbol and display flash. Release when flashing begins. 3. Wait until the display returns to oil display status which means the light has […]

1. Turn the ignition to run (one position before starting engine). 2. When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1. 3. Select MAINTENANCE and then select the Engine Oil

1. Turn the ignition to run (one position before starting engine). 2. When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1. 3. Select MAINTENANCE and then select the Engine Oil

1. Turn the ignition to run (one position before starting engine). 2. When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1. 3. Select MAINTENANCE and then select the Engine Oil

1. Turn the ignition to run (one position before starting engine). 2. When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1. 3. Select MAINTENANCE and then select the Engine Oil

1. Turn the ignition to run (one position before starting engine). 2. When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1. 3. Select MAINTENANCE and then select the Engine Oil

1. Turn the ignition to run (one position before starting engine). 2. When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1. 3. Select MAINTENANCE and then select the Engine Oil

1. Turn the ignition to run (one position before starting engine). 2. Press the square button repeatedly until SETTINGS is highlighted. Press the square button to select. 3. Press the square button to select SERVICE and follow the prompts to RESET. 4. Turn the ignition off and then start the engine to verify the indicator

1. Turn the ignition to run (one position before starting engine). 2. Press the square button repeatedly until SETTINGS is highlighted. Press the square button to select. 3. Press the square button to select SERVICE and follow the prompts to RESET. 4. Turn the ignition off and then start the engine to verify the indicator

1. Turn the ignition to run (push START/STOP button once). 2. Switches for the trip computer are located on the right side of the combination meter panel. Press the square button to bring up “Setting” and press the circle button to select. 3. Use the circle button to scroll to MAINTENANCE and use the square