Tired of ads? Remove them as a Premium Member. Read more

2011 TOYOTA Tundra Maintenance Light Reset Instructions

Instructions Comments Off on 2011 TOYOTA Tundra Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
Without multi-information display
4. Continue to press and hold the button until the trip meter displays "000000".
With multi-information display
4. Continue to press and hold the button until “MAINT REQD RESET MODE COMPLETE" appears on the multi-information display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2010 TOYOTA Tundra Maintenance Light Reset Instructions

Instructions Comments Off on 2010 TOYOTA Tundra Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
Without multi-information display
4. Continue to press and hold the button until the trip meter displays "000000".
With multi-information display
4. Continue to press and hold the button until “MAINT REQD RESET MODE COMPLETE" appears on the multi-information display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2009 TOYOTA Tundra Maintenance Light Reset Instructions

Instructions Comments Off on 2009 TOYOTA Tundra Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
Without multi-information display
4. Continue to press and hold the button until the trip meter displays "000000".
With multi-information display
4. Continue to press and hold the button until “MAINT REQD RESET MODE COMPLETE" appears on the multi-information display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2008 TOYOTA Tundra Maintenance Light Reset Instructions

Instructions Comments Off on 2008 TOYOTA Tundra Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2007 TOYOTA Tundra Maintenance Light Reset Instructions

Instructions Comments Off on 2007 TOYOTA Tundra Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2013 TOYOTA Tacoma Maintenance Light Reset Instructions

Instructions Comments Off on 2013 TOYOTA Tacoma Maintenance Light Reset Instructions

1. Start the engine.
2. Ensure trip meter A reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2012 TOYOTA Tacoma Maintenance Light Reset Instructions

Instructions Comments Off on 2012 TOYOTA Tacoma Maintenance Light Reset Instructions

1. Start the engine.
2. Ensure trip meter A reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2011 TOYOTA Tacoma Maintenance Light Reset Instructions

Instructions Comments Off on 2011 TOYOTA Tacoma Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2010 TOYOTA Tacoma Maintenance Light Reset Instructions

Instructions Comments Off on 2010 TOYOTA Tacoma Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2009 TOYOTA Tacoma Maintenance Light Reset Instructions

Instructions Comments Off on 2009 TOYOTA Tacoma Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.





Remove ads as a Premium Member. Read More