Tired of ads? Remove them as a Premium Member. Read more

2004 VOLKSWAGEN Beetle Maintenance Light Reset Instructions

Instructions Comments Off on 2004 VOLKSWAGEN Beetle Maintenance Light Reset Instructions

1. Turn the ignition off.
2. Press and hold the "TRIP" button located in the center of the instrument cluster.
3. Turn the ignition on (do not start the engine). Release the "TRIP" button and "Service" is displayed.
4. Press and hold the "TRIP" button for 10 seconds or until "Service" disappears from the display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2003 VOLKSWAGEN Beetle Maintenance Light Reset Instructions

Instructions Comments Off on 2003 VOLKSWAGEN Beetle Maintenance Light Reset Instructions

1. Turn the ignition off.
2. Press and hold the "TRIP" button located in the center of the instrument cluster.
3. Turn the ignition on (do not start the engine). Release the "TRIP" button and "Service" is displayed.
4. Press and hold the "TRIP" button for 10 seconds or until "Service" disappears from the display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2002 VOLKSWAGEN Beetle Maintenance Light Reset Instructions

Instructions Comments Off on 2002 VOLKSWAGEN Beetle Maintenance Light Reset Instructions

1. Turn the ignition off.
2. Press and hold the "TRIP" button located in the center of the instrument cluster.
3. Turn the ignition on (do not start the engine). Release the "TRIP" button and "Service" is displayed.
4. Press and hold the "TRIP" button for 10 seconds or until "Service" disappears from the display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2001 VOLKSWAGEN Beetle Maintenance Light Reset Instructions

Instructions Comments Off on 2001 VOLKSWAGEN Beetle Maintenance Light Reset Instructions

1. Turn the ignition off.
2. Press and hold the "TRIP" button located in the center of the instrument cluster.
3. Turn the ignition on (do not start the engine). Release the "TRIP" button and "Service" is displayed.
4. Press and hold the "TRIP" button for 10 seconds or until "Service" disappears from the display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2013 TOYOTA 4Runner Maintenance Light Reset Instructions

Instructions Comments Off on 2013 TOYOTA 4Runner Maintenance Light Reset Instructions

1. Start the engine and bring up the trip meter A reading.
Vehicles with smart key system:
2. Turn the “ENGINE START STOP” switch off.
3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Vehicles without smart key system:
2. Turn the ignition switch off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2012 TOYOTA 4Runner Maintenance Light Reset Instructions

Instructions Comments Off on 2012 TOYOTA 4Runner Maintenance Light Reset Instructions

1. Start the engine and bring up the trip meter A reading.
Vehicles with smart key system:
2. Turn the “ENGINE START STOP” switch off.
3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Vehicles without smart key system:
2. Turn the ignition switch off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2011 TOYOTA 4Runner Maintenance Light Reset Instructions

Instructions Comments Off on 2011 TOYOTA 4Runner Maintenance Light Reset Instructions

1. Start the engine and bring up the trip meter A reading.
Vehicles with smart key system:
2. Turn the “ENGINE START STOP” switch off.
3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Vehicles without smart key system:
2. Turn the ignition switch off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2010 TOYOTA 4Runner Maintenance Light Reset Instructions

Instructions Comments Off on 2010 TOYOTA 4Runner Maintenance Light Reset Instructions

1. Start the engine and bring up the trip meter A reading.
Vehicles with smart key system:
2. Turn the “ENGINE START STOP” switch off.
3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Vehicles without smart key system:
2. Turn the ignition switch off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2009 TOYOTA 4Runner Maintenance Light Reset Instructions

Instructions Comments Off on 2009 TOYOTA 4Runner Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Bring up the odometer reading using the trip meter reset knob then the turn ignition off.
3. Hold down knob while turning the ignition key to the run position (one position before starting engine).
4. Hold down the knob until the light goes off. Before the light goes off, it illuminates for 3 seconds, flashes for 2 seconds and illuminates for 1 second. If the system fails to reset, the light will remain flashing. In this case, return to step 1 and try again.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2008 TOYOTA 4Runner Maintenance Light Reset Instructions

Instructions Comments Off on 2008 TOYOTA 4Runner Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Bring up the odometer reading using the trip meter reset knob then the turn ignition off.
3. Hold down knob while turning the ignition key to the run position (one position before starting engine).
4. Hold down the knob until the light goes off. Before the light goes off, it illuminates for 3 seconds, flashes for 2 seconds and illuminates for 1 second. If the system fails to reset, the light will remain flashing. In this case, return to step 1 and try again.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.





Remove ads as a Premium Member. Read More