The 2014 Toyota Tacoma maintenance required light comes on when the vehicle is due or past due for an oil change service. After performing the oil change, follow these instructions to reset the change oil light:
1. Start the engine.
2. Ensure trip meter A reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates “000000” and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Filter Specification
The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:
Filter Type | Part # (2.7L) | Part # (4.0L) |
Oil Filter | 3614 | 3614 |
Air Filter | 10163 | 9683 |
Cabin Filter | 10374 | 10374 |
Oil Specification
The oil specs for this vehicle have been taken directly from the owner’s manual. More details around oil, torque, tires, and specifications can be referenced in the owner’s manual.