To reset the 2016 Dodge Dart oil life after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been […]
To reset the 2016 Chevrolet Trax remaining oil life after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Press the MENU button located on the turn signal lever. 3. Use the thumbwheel to scroll to REMAINING OIL LIFE. 4. To reset the engine oil
To reset the Volvo XC60 service reminder indicator after an oil change, please follow these instructions: 1. Turn the ignition to position I. 2. Press and hold in the OK button on the left steering wheel stalk. 3. Continue to hold OK, turn the ignition switch to position II. 4. Wait for 10 seconds. Release
To reset the 2016 Volkswagen Golf oil change service reminder, please follow these instructions: 1) With the ignition turned off, hold the 0.0 button pressed. 2) Switch on the ignition. Wait until “Reset oil change service?” appears in the display. 3) Release the button 0.0 button. The service interval display is now in reset mode.
To reset the 2016 Toyota 4Runner maintenance data after an oil change, please follow these instructions: 1. Start the engine and bring up the trip meter A reading. Vehicles with smart key system: 2. Turn the “ENGINE START STOP” switch off. 3. While pressing the Trip Meter reset button, press the “ENGINE START STOP” switch
To reset the 2016 Subaru WRX maintenance light after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Using the controsl on the left hand side of the steering wheel. Pull the i/Set button towards you to bring up the selection screen. 3. Use the
To reset the Scion iA maintenance indicator after an oil change, please follow these instructions: 1. Turn the ignition off. 2. Press and hold the TRIP/RESET button and turn the ignition on. 3. Keep pressing the TRIP/RESET for more than 5 seconds. The master warning light will flash for a few seconds when the reset
To reset the Ram 2500 oil life after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Using the steering wheel controls, press the DOWN button repeatedly to scroll to VEHICLE INFO. 3. Press the RIGHT arrow to access VEHICLE INFO and then UP or
To reset the 2016 Nissan Maxima maintenance settings after an oil change, please follow these instructions: 1. Start the engine. 2. Use the LEFT or RIGHT arrows on the steering wheel to highlight the SETTINGS menu and press ENTER. 3. Select MAINTENANCE and press ENTER. 4. From the MAINTENANCE menu select OIL and follow the
To reset the 2016 Mitsubishi Outlander service light after an oil change, please follow these instructions: 1. The “—” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched
