To reset the 2015 Chrysler 200 oil change required light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.
2015 Chrysler 200 Oil Change Required Light Reset Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the
2008 MERCURY Milan/ Hybrid Maintenance Light Reset Instructions Read More »
To reset the 2015 Chrysler Town & Country oil change required light, please follow these instructions: 1. Turn the ignition to run (one position before starting the engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has
2015 Chrysler Town & Country Oil Change Required Light Reset Read More »
1. Turn the ignition to position 1 (one position before starting the engine). 2. Press button (UP arrow) or (DOWN arrow) on the multifunction steering wheel until the FSS indicator with (Single Wrench) or (Double Wrench) and the service deadline appears in the multifunction display. 3. Press the reset knob to the left in the
2000 MERCEDES CLK – Class Maintenance Light Reset Instructions Read More »
To reset the 2015 Chevrolet Camaro change engine oil soon light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the “Change Engine Oil Soon” message is not on, the system
2015 Chevrolet Camaro Change Engine Oil Soon Reset Read More »
1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.
2008 Jeep Wrangler Maintenance Light Reset Instructions Read More »
To reset the 2015 Cadillac CTS oil light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. *Use the DIC controls on the right side of the steering wheel to display the REMAINING OIL LIFE. 3. Press SEL on the DIC controls. 4. Hold SEL down for a
To reset the 2015 Buick Enclave oil light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Press the vehicle information button (i) until OIL LIFE REMAINING displays. 3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the
1. Turn the ignition to position 1 (one position before starting the engine). 2. Press the system selection button (3 located on the lower left of the steering wheel) repeatedly until the kilometer reading is shown in the multi information display.) 3. Press the cluster illumination button (lower left of instrument panel) quickly 3 times.
2006 MERCEDES CLS – Class Maintenance Light Reset Instructions Read More »
1. Turn the ignition to position 1 (one position before starting the engine). 2. Within 4 seconds press 0 button twice. 3. The present status for days or distance displays, within 10 seconds turn the electroninc key in steering lock to position 0. 4. Press and hold 0 button while turning electronic key in steering
1998 MERCEDES C-Class Maintenance Light Reset Instructions Read More »
