1. Turn the ignition to run (one position before starting engine). 2. Display the OIL LIFE REMAINING on the DIC by pressing the (i) button. 3. Press and hold the SET/RESET button (check mark button) on the DIC for more than 5 seconds. The oil life will change to 100%. 4. Turn the ignition off […]
2008 HUMMER H2 Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after step 1 press and release the accelerator pedal 3 times within 5 seconds. If the OIL LIFE RESET message flashes for 10 seconds, the system is resetting. 3. Turn the ignition off and then start the engine to verify the indicator
2007 HUMMER H2 Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after step 1 press and release the accelerator pedal 3 times within 5 seconds. If the OIL LIFE RESET message flashes for 10 seconds, the system is resetting. 3. Turn the ignition off and then start the engine to verify the indicator
2006 HUMMER H2 Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after step 1 press and release the accelerator pedal 3 times within 5 seconds. If the OIL LIFE RESET message flashes for 10 seconds, the system is resetting. 3. Turn the ignition off and then start the engine to verify the indicator
2005 HUMMER H2 Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after step 1 press and release the accelerator pedal 3 times within 5 seconds. If the OIL LIFE RESET message flashes for 10 seconds, the system is resetting. 3. Turn the ignition off and then start the engine to verify the indicator
2004 HUMMER H2 Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press the TRIP button until the engine oil life indicator is displayed. 3. Press the trip button for more than 10 seconds. The engine oil life indicator and the maintenance items code(s) will blink. 4. Turn the ignition off and then start the
2007 HONDA S2000 Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press the TRIP button until the engine oil life indicator is displayed. 3. Press the trip button for more than 10 seconds. The engine oil life indicator and the maintenance items code(s) will blink. 4. Turn the ignition off and then start the
2006 HONDA S2000 Maintenance Light Reset Instructions Read More »
1. Turn the ignition off. 2. Press and hold the TRIP METRE RESET button while you turn the ignition switch to run (one position before starting engine). 3. Continue holding the button until the indicator resets (indicator light goes out). 4. Turn the ignition off and then start the engine to verify the indicator has
2005 HONDA S2000 Maintenance Light Reset Instructions Read More »
The 2004 Honda s2000 is equipped with a maintenance required (MAINT REQ’D) indicator. This light comes on when the distance driven since the last scheduled maintenance reaches 6,000 miles (9,600km), the indicator starts blinking. If you exceed 7,500 miles (12,000km), the indicator stays on. Maintenance Required Reset Instructions: 1. Turn the ignition off.2. Press and
2004 HONDA S2000 Maintenance Light Reset Instructions Read More »
1. Turn the ignition off. 2. Press and hold the TRIP METRE RESET button while you turn the ignition switch to run (one position before starting engine). 3. Continue holding the button until the indicator resets (indicator light goes out). 4. Turn the ignition off and then start the engine to verify the indicator has
2003 HONDA S2000 Maintenance Light Reset Instructions Read More »
