To reset the 2012 Nissan Leaf maintenance info, please follow these instructions: 1. Turn the ignition to run (push START/STOP button once). 2. Switches for the trip computer are located on the right side of the combination meter panel. Press the square button to bring up “Setting” and and press the circle button to select. […]
2012 NISSAN Leaf Maintenance Light Reset Instructions Read More »
To reset the 2001 Mercury Mountaineer oil change light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display “OIL LIFE RESET TO
2001 MERCURY Mountaineer Maintenance Light Reset Instructions Read More »
To reset the 2008 Nissan Armada maintenance info, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Press the vehicle information display INFO button located on the isntrument panel to toggel to “Setting”. 3. In the “Setting” mode screen rotate the INFO button to move to “Maintenance” and
2008 NISSAN Armada Maintenance Light Reset Instructions Read More »
To reset the 2011 Lincoln MKX oil life, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Use the up/down arrows on the left steering wheel controls to highlight SETTINGS. Press OK to select. 3. Use the right arrow repeatedly to select OIL LIFE RESET. Press OK to
2011 LINCOLN MKX Maintenance Light Reset Instructions Read More »
To reset the 2008 Mitsubishi Lancer maintenance light, please follow these instructions: 1. The “—” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
2008 MITSUBISHI Lancer Maintenance Light Reset Instructions Read More »
To reset the 2000 Mercury Mountaineer oil change light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display “OIL LIFE RESET TO
2000 MERCURY Mountaineer Maintenance Light Reset Instructions Read More »
To reset the 2005 Mercedes G Class maintenance light, please follow these instructions: 1. Turn the ignition to position 1 (one position before starting the engine). 2. Press the system selection button (left button on left steering wheel controls) repeatedly until the trip and total distance reading is shown in the multi information display.) 3.
2005 MERCEDES G – Class Maintenance Light Reset Instructions Read More »
To reset the 2002 Mercury Mountaineer oil life, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Press the SETUP control to access the System Check function. 3. Press and release the RESET control to display “OIL LIFE XX% HOLD RESET NEW”. 4. Press and hold the RESET
2002 MERCURY Mountaineer Maintenance Light Reset Instructions Read More »
1. Start the engine and bring up the trip meter A reading. Vehicles with smart key system: 2. Turn the “ENGINE START STOP” switch off. 3. While pressing the Trip Meter reset button, press the “ENGINE START STOP” switch once (do not start engine). 4. Continue to press and hold the button until the
2015 Toyota 4Runner Maintenance Light Reset Read More »
To reset the 2015 Acura RDX maintenance minder, please follow these instructions: 1. Set the power mode to ON (do not start the engine). 2. Use the INFO (up/down) to highlight the CUSTOMIZE SETTINGS menu and select using the SEL/RESET button. 3. Select the MAINTENANCE INFO menu using the SEL/RESET button. 4. The oil life
2015 Acura RDX Maintenance Minder Reset Read More »
