To reset the 2015 Jeep Cherokee oil light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.
2015 Jeep Cherokee Oil Change Light Reset Read More »
Land Rover recommends the use of a reset tool.
2005 LAND ROVER LR3 Maintenance Light Reset Instructions Read More »
To reset the 2015 Dodge Dart oil change indicator, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Push and release the DOWN arrow button to scroll downward through the main menu to “Vehicle Info”. 3. Push and release the RIGHT arrow button to access the ”Oil Life”
2015 Dodge Dart Oil Change Indicator Reset Read More »
To reset the 2015 Chrysler 300 oil life, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Push and release the DOWN arrow button to scroll downward through the main menu to “ Vehicle Info.” 3. Push and release the RIGHT arrow button to access the ”Oil Life”
2015 Chrysler 300 Oil Life Reset Read More »
1. Turn the ignition to position 1 (one position before starting the engine). 2. Press the system selection button (located on the lower left of the steering wheel) repeatedly until the kilometer reading is shown in the multi information display.) 3. Press the cluster illumination button (lower left of instrument panel) quickly 3 times. The
2005 MERCEDES A-Class Maintenance Light Reset Instructions Read More »
To reset the 2015 Subaru WRX maintenance light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Using the controsl on the left hand side of the steering wheel. Pull the i/Set button towards you to bring up the selection screen. 3. Use the Up or Down arrow
2015 Subaru WRX Maintenance Light Reset Read More »
1. Turn the ignition to run (one position before starting engine). 2. Display the engine oil life by repeatedly pressing the (up/down) button on the steering wheel. 3. Press and hold the SEL/RESET for more than 10 seconds. The oil life reset mode is displayed on the multi information display. 4. Select RESET with the
2011 HONDA CR-Z Maintenance Light Reset Instructions Read More »
To reset the 2015 Subaru Impreza, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Using the controsl on the left hand side of the steering wheel. Pull the i/Set button towards you to bring up the selection screen. 3. Use the Up or Down arrow to highlight
2015 Subaru Impreza Maintenance Light Reset Read More »
1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.
2008 CHRYSLER Pacifica Maintenance Light Reset Instructions Read More »
To reset the 2015 Toyota Prius, please follow these instructions: 1. Press the “ENGINE START STOP” switch once (do not start engine) or turn ignition key to run (one position before starting engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While holding the MPH or KM/H button turn
2015 Toyota Prius Oil Maintenance Required Reset Read More »
