OilReset.com Blog

1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the […]

1. Turn the ignition to run (one position before starting engine). 2. Use the left steering wheel controls to scroll through the message center. Press the up/down arrow repeatedly until OIL LIFE RESET is selected. 3. Press OK to select this option and display SET XXX%. 4. Press and hold OK again for 2 seconds

1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been

1. Turn the ignition to run (one position before starting engine).2. Fully depress the accelerator pedal slowly three times within 10 seconds.3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).2. Press and release the TRIP/RESET stem button in the DIC until the OIL LIFE message is displayed (located in the lower centre of instrument cluster).“3. Once the alternating OIL LIFE and RESET messages appear on the DIC display4. Turn the ignition off and then

With Driver Information Centre (DIC): 1. Turn the ignition to run (one position before starting engine). 2. Press the vehicle information button (i) until OIL LIFE REMAINING displays. 3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and CHANGE ENGINE OIL SOON message will go off.

1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Locate the instrument panel fuse box (inside driver door jam).2. Turn the ignition to run (one position before starting engine).3. Hold the OIL LIFE (red button) for 5 seconds and indicator light should reset.4. Turn the ignition off and start the engine to verify the indicator has been reset.