To reset the 2010 Mitsubishi Outlander Service Interval, please follow these instructions: 1. The “—” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”. […]
2010 Mitsubishi Outlander Service Interval Reset Read More »
To reset the 2008 Mercury Sable Oil Life, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4.
1. Turn the ignition to run (one position before starting engine). 2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE. 3. Press the SET/CLR button to reset the oil life to 100%.
2010 CHEVROLET Cruze Maintenance Light Reset Instructions Read More »
1. Remove the instrument panel fuse box cover.2. Turn the ignition to run (one position before starting engine).3. Press the OIL RESET button for 5 seconds and the change oil lamp should go off.4. Turn the ignition off and then start the engine to verify the indicator has been reset.
1994 CHEVROLET Caprice Maintenance Light Reset Instructions Read More »
To reset the 2007 Mercedes C Class Service light, please follow these instructions: 1. Turn the ignition to position 1 (one position before starting the engine). 2. Press the system selection button (3 located on the lower left of the steering wheel) repeatedly until the kilometer reading is shown in the multi information display.) 3.
1. Turn the ignition to run (one position before starting engine). 2. Press the vehicle information button (i) until OIL LIFE REMAINING displays. 3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off. 4. Start the engine
2008 BUICK Enclave Maintenance Light Reset Instructions Read More »
To reset the 2006 Lincoln LS oil change light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Press the STATUS control to access the System Check function. 3. Press RESET to reset oil %. 4. Press and hold the RESET control to set to 100%. After a
To reset the 2003 Honda Element Maintenance Required Light, please follow these instructions: 1. Turn off the engine. 2. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting). 3. Hold the button for at least 10 seconds, until the indicator resets. 4. Turn
2003 Honda Element Maintenance Required Light Reset Read More »
1. Reset the coloured indicator by inserting the key in the slot below the indicator.
1998 ACURA CL Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press and hold the AVERAGE SPEED and RANGE buttons until the display resets to 100. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.
1999 CHEVROLET Camaro Maintenance Light Reset Instructions Read More »
