The 2013 Toyota Venza is offered in a gasoline model. After performing the oil change the maintenance data will need to be reset. Follow these steps to reset this light:
1. Start the engine and bring up the trip meter A reading.
Vehicles with smart key system:
2. Turn the “ENGINE START STOP” switch off.
3. While pressing the Trip Meter reset button, press the “ENGINE START STOP” switch once (do not start engine).
4. Continue to press and hold the button until the trip meter displays “000000”.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Vehicles without smart key system:
2. Turn the ignition switch off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates “000000” and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
When doing the oil change and topping up fluids you will need to use the following specifications:
Engine Size | 4 Cyl. 2.7L Gas | 6 Cyl. 3.5L Gas |
Motor Oil | 0W20 | 0W20 |
Oil Capacity w/Filter | 4.6 US qt. (4.4L) | 6.4 US qt. (6.1L) |
Brake | Dot 3 | Dot 3 |
Engine Coolant | Toyota Super Long Life Coolant | Toyota Super Long Life Coolant |
Automatic Transmission | Toyota Genuine ATF WS | Toyota Genuine ATF WS |
Rear Differential | Hypoid gear oil API GL-5Above 0°F (-18°C): SAE 90Below 0°F (-18°C): SAE 80W orSAE 80W-90 | Hypoid gear oil API GL-5Above 0°F (-18°C): SAE 90Below 0°F (-18°C): SAE 80W orSAE 80W-90 |
Transfer Case | Hypoid gear oil API GL-5Above 0°F (-18°C): SAE 90Below 0°F (-18°C): SAE 80W or 80W-90 | Hypoid gear oil API GL-5Above 0°F (-18°C): SAE 90Below 0°F (-18°C): SAE 80W or 80W-90 |
You can cross reference the following Purolator filter numbers for your own application:
Engine Size | 4 Cyl. 2.7L Gas | 6 Cyl. 3.5L Gas |
Oil Filter | L25608 | L25608 |
Air Filter | A35649 | A45650 |
Cabin Filter | C35667 | C35667 |
Always consult the owner’s manual or manufacturer prior to any service