Tired of ads? Remove them as a Premium Member. Read more

2013 Honda CR-Z Maintenance Light Reset & Fluids

Automotive, How To Fridays 2 Comments »
2013 Honda CR-Z

2013 Honda CR-Z

The 2013 Honda CR-Z is offered in a gasoline/electric model.  The engine oil will require service when the Maintenance Minder light comes on.  Follow these steps to reset this light:

1. Turn the ignition to run (one position before starting engine).

2. Display the engine oil life by repeatedly pressing the (up/down) button on the steering wheel.

3. Press and hold the SEL/RESET for more than 10 seconds.  The oil life reset mode is displayed on the multi information display.

4. Select RESET with the (up/down) button, then press the SEL/RESET button.  The engine oil life will reset to 100.

5. Turn the ignition off and then start the engine to verify the indicator has been reset.

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

4 Cyl. 1.5L Gas

Motor Oil

0W20

Oil Capacity w/Filter

3.8 US qt. (3.6L)

Brake Fluid

Honda Heavy Duty Dot 3

Engine Coolant

Honda Long Life Coolant Type 2

Automatic Transmission

Honda CVTF

Manual

Transmission

Honda Manual Transmission Fluid

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

4 Cyl. 1.5L Gas

Oil Filter

L14610

Air Filter

A26150

Cabin Filter

C36080

1.5L 4 Cyl. Hybrid
1.5L 4 Cyl. Hybrid

*At the time of this posting

https://www.oilreset.com




2013 Honda CR-V Maintenance Light Reset & Fluids

Automotive, How To Fridays 5 Comments »
2013 Honda CR-V

2013 Honda CR-V

The 2013 Honda CR-V is offered in a gasoline model.  The engine oil will require service when the Maintenance Minder light comes on.  Follow these steps to reset this light:

1. Turn the ignition to run (one position before starting engine).

2. Press the SELECT/RESET knob repeatedly until the engine oil life is displayed.

3. Press the SELECT/RESET knob for about 10 seconds.  The information display shows the reset mode initial display.

4. Select the ‘‘OIL LIFE’’ indicator by turning the SELECT/RESET knob.  The display begins to blink.  Push the same knob to enter this setting.

5. The engine oil life and the maintenance item code(s) will begin to blink.  Press the SELECT/RESET knob for another 5 seconds.

6. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.

7. Turn the ignition off and then start the engine to verify the indicator has been reset.

*Vehicles with the multi-information display will need to access the Maintenance Info screen through the SOURCE button.

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

4 Cyl. 2.4L Gas

Motor Oil

0W20

Oil Capacity w/Filter

4.2 US qt. (4.0L)

Brake Fluid

Honda Heavy Duty Dot 3

Engine Coolant

Honda Long Life Coolant Type 2

Automatic Transmission

ATF DW-1

Rear Differential

Honda Dual Pump Fluid II2

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

4 Cyl. 2.4L Gas

Oil Filter

L14610

Air Filter

*Dealer Part

Cabin Filter

C35519

PCV Valve

PV1088

2.4L 4 Cyl. (Gas)
2.4L 4 Cyl. (Gas)

*At the time of this posting

https://www.oilreset.com




2013 Honda Crosstour Maintenance Light Reset & Fluids

Automotive, How To Fridays Comments Off on 2013 Honda Crosstour Maintenance Light Reset & Fluids
2013 Honda Crosstour

2013 Honda Crosstour

The 2013 Honda Crosstour is offered in a gasoline model.  The engine oil will require service when the Maintenance Minder light comes on.  Follow these steps to reset this light:

  1.   Press the Start/Stop button once (do not start the engine).

  2.   Display the engine oil life by repeatedly pressing the SEL/RESET knob.

  3.   Press and hold the SEL/RESET knob for 10 or more seconds and the engine oil life and other maintenance codes will blink.

  4.   Press the know for 5 or more seconds and the engine oil life will return to 100%  and the maintenance codes will reset.

  5.   Turn the ignition off and start the engine to verify the indicator has been reset.

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

6 Cyl. 3.5L Gas

4 Cyl. 2.4L Gas

Motor Oil

0W20

0W20

Oil Capacity w/Filter

4.5 US qt. (4.3L)

4.2 US qt. (4.0L)

Brake Fluid

Honda Heavy Duty Dot 3

Honda Heavy Duty Dot 3

Engine Coolant

Honda Long Life Coolant Type 2

Honda Long Life Coolant Type 2

Automatic Transmission

ATF DW-1

ATF DW-1

Power Steering Fluid

N/A

Honda Power Steering Fluid

Transfer Case

SAE 90 Hypoid Gear Oil/ GL4 or GL5

N/A

Rear Differential

Honda Dual Pump Fluid II

N/A

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

6 Cyl. 3.5L Gas

4 Cyl. 2.4L Gas

Oil Filter

L14610

L14610

Air Filter

*Dealer Part

*Dealer Part

Cabin Filter

C35519

C35519

V6 3.5L (Gas)

V6 3.5L (Gas)

*At the time of this posting

https://www.oilreset.com




2013 Honda Civic (Hybrid) Maintenance Light Reset & Fluids

Automotive, How To Fridays Comments Off on 2013 Honda Civic (Hybrid) Maintenance Light Reset & Fluids
2013 Honda Civic Hybrid

2013 Honda Civic Hybrid

The 2013 Honda Civic sedan is offered is also offered in a hybrid gasoline model.  The engine oil will require service when the Maintenance Minder light comes on.  Follow these steps to reset this light:

  1. Press the Start/Stop button once (do not start the engine).

  2. Press the Menu button to go to the Vehicle Menu screen.

  3. Select Vehicle Information with the (+) button, then press the SOURCE button.

  4. Press the SOURCE button again to go to the Maintenance Info screen.  The engine oil life reset mode will appear on the multi information display.

  5. Select Yes with the (–) button, the press the SOURCE button.  The engine oil life display returns 100%.

  6. Turn the ignition off and then start the engine to verify the indicator has been reset.

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

4 Cyl. 1.3L Hybrid

Motor Oil

0W20

Oil Capacity w/Filter

3.8 US qt. (3.6L)

Brake Fluid

Honda Heavy Duty Dot 3

Engine Coolant

Honda Long Life Coolant Type 2

Automatic Transmission

CVTF

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

4 Cyl. 1.3L Hybrid

Oil Filter

L14610

Air Filter

A26196

Cabin Filter

C35519

4 Cyl. 1.3L Gas Engine

4 Cyl. 1.3L Gas Engine

 

 

 

 

 

 

 

 

https://www.oilreset.com




2013 Honda Civic (Natural Gas) Maintenance Light Reset & Fluids

Automotive, How To Fridays 2 Comments »
Honda Civic NG

Honda Civic NG

The 2013 Honda Civic sedan is also offered in a natural gas model.  The engine oil will require service when the Maintenance Minder light comes on.  Follow these steps to reset this light:

  1. Press the Start/Stop button once (do not start the engine).

  2. Press the Menu button to go to the Vehicle Menu screen.

  3. Select Vehicle Information with the (+) button, then press the SOURCE button.

  4. Press the SOURCE button again to go to the Maintenance Info screen.  The engine oil life reset mode will appear on the multi information display.

  5. Select Yes with the (–) button, the press the SOURCE button.  The engine oil life display returns 100%.

  6. Turn the ignition off and then start the engine to verify the indicator has been reset.

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

4 Cyl. 1.8L Natural Gas

Motor Oil

0W20

Oil Capacity w/Filter

3.9 US qt. (3.7L)

Brake Fluid

Honda Heavy Duty Dot 3

Engine Coolant

Honda Long Life Coolant Type 2

Automatic Transmission

ATF DW-1

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

4 Cyl. 1.8L Natural Gas

Oil Filter

L14610

Air Filter

A26171

Cabin Filter

C35519

PCV Valve

PV1088

4 Cyl. 1.8L Engine

4 Cyl. 1.8L Engine

 

 

 

 

 

 

 

 

https://www.oilreset.com

 




2013 Honda Civic Sedan (Gasoline) Maintenance Light Reset & Fluids

Automotive, How To Fridays Comments Off on 2013 Honda Civic Sedan (Gasoline) Maintenance Light Reset & Fluids
2013 Honda Civic Sedan

2013 Honda Civic Sedan

The 2013 Honda Civic Sedan is offered in a gasoline model.  The engine oil will require service when the Maintenance Minder light comes on.  Follow these steps to reset this light:

  1. Press the Start/Stop button once (do not start the engine).

  2. Press the Menu button to go to the Vehicle Menu screen.

  3. Select Vehicle Information with the (+) button, then press the SOURCE button.

  4. Press the SOURCE button again to go to the Maintenance Info screen.  The engine oil life reset mode will appear on the multi information display.

  5. Select Yes with the () button, the press the SOURCE button.  The engine oil life display returns 100%.

  6. Turn the ignition off and then start the engine to verify the indicator has been reset.

Accessing the Menu

Accessing the Menu

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

4 Cyl. 1.8L Gas

4 Cyl. 2.4L Gas

Motor Oil

0W20

0W20

Oil Capacity w/Filter

3.9 US qt. (3.7L)

4.4 US qt. (4.2L)

Brake Fluid

Honda Heavy Duty Dot 3

Honda Heavy Duty Dot 3

Clutch Fluid

Honda Heavy Duty Dot 3

Honda Heavy Duty Dot 3

Engine Coolant

Honda Long Life Coolant Type 2

Honda Long Life Coolant Type 2

Automatic Transmission

ATF DW-1

Manual Transmission

Honda Manual Transmission Fluid

Honda Manual Transmission Fluid

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

4 Cyl. 1.8L Gas

4 Cyl. 2.4L Gas

Oil Filter

L14610

L14610

Air Filter

A26171

A26197

Cabin Filter

C35519

C35519

4 Cyl. 1.8L Engine

4 Cyl. 1.8L Engine

 

 

 

 

 

 

 

 

https://www.oilreset.com




2013 Honda Accord Maintenance Light Reset & Fluids

Automotive, How To Fridays 3 Comments »
2013 Honda Accord Sedan

2013 Honda Accord Sedan

The 2013 Honda Accord is offered in a gasoline model.  The engine oil will require service when the Maintenance Minder light comes on.  Follow these steps to reset this light:

  1. Press the Start/Stop button once (do not start the engine).

  2. Press the (up/down) button on the steering wheel to select Vehicle Settings, the press the SEL/RESET button.

  3. Press the (up/down) button until Maintenance Reset appears on the display (the oil life reset mode is displayed on the multi information display).

  4. Select Reset by pressing the (up/down) button, then press the SEL/RESET button to reset the engine oil life display.  The maintenance item codes will disappear and the engine oil life will reset to 100.

  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

6 Cyl. 3.5L Gas

4 Cyl. 2.4L Gas

Motor Oil

0W20

0W20

Oil Capacity w/Filter

4.5 US qt. (4.3L)

4.4 US qt. (4.2L)

Brake Fluid

Honda Heavy Duty Dot 3

Honda Heavy Duty Dot 3

Engine Coolant

Honda Long Life Coolant Type 2

Honda Long Life Coolant Type 2

Automatic Transmission

ATF DW-1

HCF-2

Manual Transmission

N/A

Honda Manual Transmission Fluid

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

6 Cyl. 3.5L Gas

4 Cyl. 2.4L Gas

Oil Filter

L14610

L14610

Air Filter

Dealer Part

Dealer Part

Cabin Filter

C35519

C35519

4 Cyl. 2.4L Gas Engine

4 Cyl. 2.4L Gas Engine

 

 

 

 

 

 

 

 

 

Using the Trip Button to reset.

Using the Trip Button to reset.

 

 

 

 

 

 

 

Using the steering wheel info button to reset.

Using the steering wheel info button to reset.

 

 

 

 

 

 

 

 

 

 

Using the nav screen to reset.

Using the nav screen to reset.

 

 

 

 

 

 

 

 

 

https://www.oilreset.com




2013 Acura MDX Maintenance Light Reset & Service

Automotive, How To Fridays Comments Off on 2013 Acura MDX Maintenance Light Reset & Service
2013 Acura MDX

2013 Acura MDX

The 2013 Acura MDX is offered in a gasoline model.  The engine oil will require service when the Maintenance Minder light comes on.  Follow these steps to reset this light:

  1. Press the Start/Stop button once (do not start the engine).

  2. If the engine oil life is not displayed, press the SEL/RESET button the steering wheel repeatedly until the multi-information display shows blank, SH-AWD and tire pressure.

  3. Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds.  The remaining engine oil life reset mode will be shown on the multi information display.

  4. Select Reset by pressing the INFO (up/down) button, then press the SEL/RESET button to reset the engine oil life display.  The maintenance item codes will disappear and the engine oil life will reset to 100.

  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

V6 3.7L Gas

Motor Oil

5W20

Oil Capacity w/Filter

4.5 US qt. (4.3L)

Brake Fluid

Honda Heavy Duty Dot 3

Engine Coolant

Honda Long Life Coolant Type 2

Automatic Transmission

Acura ATF DW-1

Power Steering Fluid

Acura Power Steering

Transfer Case

 Honda Transfer Case Fluid

Rear Differential

Honda Rear Differential Fluid

3.7L V6 VTEC
3.7L V6 VTEC

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

V6 3.7L Gas

Oil Filter

L14610

Air Filter

A26172

Cabin Filter

C35519

 

https://www.oilreset.com




2013 Acura ILX Maintenance Light Reset & Service

How To Fridays Comments Off on 2013 Acura ILX Maintenance Light Reset & Service
2013 Acura ILX

2013 Acura ILX

The 2013 ILX is offered in a hybrid or gasoline model.  The engine oil will require service when the Maintenance Minder light comes on.  Follow these steps to reset this light:

1. Press the Start/Stop button once (do not start the engine).

2. Use the INFO (▲/▼) to highlight the CUSTOMIZE SETTINGS menu and select using the SEL/RESET button.

3. Select the MAINTENANCE INFO menu using the SEL/RESET button

4. The oil life reset mode is displayed on the multi-information display.

5. Select RESET with the (▲/▼) button, then press the SEL/RESET button.  The displayed maintenance items disappear, and the engine oil life display is reset to 100%.

6. Turn the ignition off and then start the engine to verify the indicator has been reset.

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

1.5L Hybrid

2.0L

2.4L

Motor Oil

0W20

0W20

0W20

Oil Capacity w/Filter

3.8 qt. (3.6L)

4.0 qt. (3.8L)

4.2 qt. (4.0L)

Brake Fluid

Dot 3

Dot 3

Dot 3

Engine Coolant

Honda Long Life Coolant Type 2

Honda Long Life Coolant Type 2

Honda Long Life Coolant Type 2

Automatic Transmission

Acura CVTF

Acura ATF DW-1

Acura ATF DF-1

Manual Transmission

Acura Manual Transmission Fluid

Acura Manual Transmission Fluid

Clutch Fluid

Dot 3

Dot 3

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

1.5L Hybrid

2.0L

2.4L

Oil Filter

L14610

L14610

L14610

Air Filter

A26196

A26171

A26197

Cabin Filter

C35519

C35519

C35519

Reset Controls on Steering Wheel

Reset Controls on Steering Wheel




2013 VW Touareg Service Interval Reset & Maintenance

How To Fridays 2 Comments »
2013 VW Touareg TDI

2013 VW Touareg TDI

The 2013 VW Touareg is offered in a diesel, gasoline or hybrid engine.  The engine oil will require service when the Service Interval has reached its limit.  Follow these steps to reset this light:

1) Close the hood, trunk and all doors.

2) Press the START/STOP button to start the engine.

3) Press the CAR button.

4) Press the Service button.

5) Press the Service Interval Reset button and confirm.

6) The new service interval will be displayed.

7) Turn the ignition off.

8) Start the engine to verify the reset is complete.

 When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

3.0L TDI

3.6L Gas

3.0L Hybrid

Motor Oil

5W40 Synthetic

VW 507 00

5W40 Synthetic

VW 502 00

5W40 Synthetic

VW 502 00

Oil Capacity

8.1 qt. (7.7L) w/filter

7.1 qt. (6.7L) w/filter

7.2 qt. (6.8L) w/filter

Power Steering

VW Part

VW Part

VW Part

Brake Fluid

Dot 4

Dot 4

Dot 4

Engine Coolant

VW Coolant

VW Coolant

VW Coolant

Automatic Transmission

VW ATF

VW ATF

VW ATF

Front/Rear Differential

VW Part

VW Part

VW Part

Transfer Case

VW Part

VW Fluid

VW Fluid

You can cross reference the following Purolator filter numbers for your own application (at the time of printing some parts are only available through VW):

Engine Size

3.0L TDI

3.6L Gas

3.0L Hybrid

Oil Filter

VW Part

VW Part

L45598

Air Filter

A35546

A35546

A35546

Cabin Filter

C35762C

C35762C

C35762C

 

Written by Ronald Rameshnauth





Remove ads as a Premium Member. Read More